Denon DN-C680 manual Preset Functions and Operations, List of Preset Functions

PRESET FUNCTIONS AND OPERATIONS

(1)List of Preset Functions

•Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared even when the power is turned off.

•The functions shown on the table below can be preset. Set the functions according to the usage purpose to efficiently achieve even higher quality playback.

•One of the preset functions can be used to display information on this set (microprocessor version).

Preset function type	Description	Character display	No.
		(as set upon shipment from
		factory)
Preset type	Selection of preset type	Preset Type 1	1
Auto cue	Setting of audio startup level for auto cue function	CueDet.-60db	2
Auto stop	Setting of whether or not to automatically stop the servo functions	Sleep ON	3
FS converter	Setting of whether or not to use the FS converter and sampling frequency	FS OFF	4
	setting (when optional FS converter mounted)
Program 1	Setting of whether or not to play program 1	Program1 OFF	5
Program 2	Setting of whether or not to play program 2	Program2 OFF	6
Program 3	Setting of whether or not to play program 3	Program3 OFF	7
Digital output	Selection of output signal format	D.Out Pro	8
Digital output	Selection of whether or not to output subcodes	Subcode OFF	9
End monitor	Setting of whether or not to use the end monitor function and monitor	End Mon. 10sec	10
	time setting
E.O.M.	Setting of whether or not to display the EOM and display time setting	E.O.M. 10sec	11
Next track standby	Setting of whether or not to standby at the next track when the	NextStb.OFF	12
	STANDBY/CUE button is pressed during playback
Fade in time	Fade in time setting	Fadeln OFF	13
Fade out time	Fade out time setting	Fadeout OFF	14
Play speed	Standard playing speed setting	Normal Speed	15
Delay start	Delay start time setting	Delay OFF	16
Play lock	Selection of whether or not to inhibit the panel switches during playback	PlayLock OFF	17
Frame display	Selection of whether or not to display frames	FR Disp ON	18
CDR disc	Selection of whether or not to play CDR discs which do not include a TOC	CD-R NO TOC	19
CDR disc	Selection of whether or not to play skip tracks on CDR discs	CD-R Skip OFF	20
Serial remote	Baud rate setting	9600bps	21
Switch protect	Selection of whether or not to enable the panel switches	Switch ENA	22
Player ID	Selection of whether or not to set player IDs and selection of ID number	PlayerlD OFF	23
Parallel remote	Selection of whether or not to accept parallel remote signals	Remote ENA	24
Parallel remote	Selection of whether or not to output standby tally	ST. Tally ON	25
Parallel remote	External control tally output signal setting	Index2 Tally	26
Parallel remote	Fader start mode selection	Fader Pause	27
Stereo/mono	Selection of stereo or monaural playback	Stereo	28
Pos Code	Selection of whether or read Pos codes	Pos OFF	29
Preset clear	Setting for clearing presets and setting them to the initial values	' Init. Preset	30
Set information	Microprocessor version display	Ver. **** (* = number)	31

When presettings are made, the time display set with the TIME button, the play mode set with the PLAY MODE button and the finish mode set with the FINISH MODE button at that time are stored in the memory. These modes will be set when the power is next turned on.

NOTE:

For CDR discs without TOCs, there are no pits (signals) at the disc's lead in and lead out sections, so errors may occur, particularly when searching for tracks. If an error should occur, open the disc holder, then close it and perform the operation again.

22