Hotpoint Instructions manual How to use your Dishwasher

Page 8

D ISHWASHER

How to use your Dishwasher

First of all.

Modifying a wash cycle in

- Turn on the water supply

progress.

tap completely.

Ifyouhavechosenthewrongcycle

- Add the correct amount of

- You can modify the wash cycle in

detergent.

progress, if it has only just started.

- Load the baskets correctly.

KeeptheResetbutton"R"pressed

- Check that the spray arms

in for approximately 5 seconds, a

rotate freely.

prolongedbeepwillsound,followed

- Close the door securely.

by three short beeps.

 

Indicatorlight"G"willgoouttoshow

 

all the settings will have been can-

- Press the ON-OFF button "A":

celled. You are now free to re-set

you will hear a short beep and indi-

the correct wash cycle.

cator light "B" comes on.

You've left out a dish?

Yourapplianceisnowonandawait-

inginstructions.

Interrupt the wash cycle by press-

 

ing the On-Off button "A", then

Select the wash cycle.

insert the dish you had forgotten.

Select the wash cycle by pressing

When you shut the door, press the

button "P". Each time this button is

On-Off button again. The cycle will

pressed,abeepwillsoundandindi-

startupfromwhereyouinterrupted

cator lights “E” will come on in

it.

sequence.Select the wash cycle

Cycle end

most suitable for the type of dishes

to wash (see ‘Programme Chart’).

The end of the wash cycle is indi-

Close the door and press the Start

cated by 2 short beeps and the

button after a few seconds, you will

flashing ofthedryingphaseindica-

hearashortbeepandthewashcy-

torlight.

cle will started.

Turn the appliance off by pressing

 

the On-Off button “A”, thus switch-

The dishwasher informs

ing off the electricity supply.

you.

Turn off the water tap.

Yourdishwasherhasindicatorlights

Wait a few minutes before unload-

"G" which light up to indicate the

ing the dishes: they are very hot! If

washcyclephasethatisunderway.

youwaitalittlewhile,theydrybetter

 

due to the steam.

 

Empty the lower basket first.

 

There's been a power

 

failure or you opened the

 

dishwasher door

 

The wash cycle stops and then

 

restarts when the electricity comes

 

backonorwhenyouclosethedoor.

Delaying the start of a programme.

Whenyouhaveloadedthedishes, youcanchoosewhentostartyour dishwasherbeforesettingthewash cycledesired.

Pressbutton"D"todelaythestart of the wash cycle by 12, 9, 6 or 3 hours.Eachtimeyoupressit,you willhearashortbeepandindicator light "G" corresponding to the selecteddelaywillcomeon.

Selectthedesiredwashcycle. PresstheStartbutton,youhearthe beep,thecountdowntothedelayed startwillbegin.

If, for example, you have set a 12 hourdelay,onceyouhaveselected awashcyclethe12hourindicator lightwillflash...followedbytheothers insequenceuntilthesettimedelay isup.Theindicatorlightswillkeep you informed of the countdown progressatalltimes.

Oncethistimeisup,indicatorlight "G"willstopflashingandthewash cyclewillbegin.

If you change your mind and you wishtosetashorterdelay,justopen thedoor,pressbutton"D",youneed notresetthewashcycle.

Ifyouwanttocancelthedelayset andyouwishtostartthewashcycle immediately, press button "D" repeatedlyuntilthecyclestartsand indicatorlight"G"correspondingto thecyclestartphasecomeson.

Cycle phase and delayed start indicator light "G"

(1)Flashing to indicate a delayedstart,toremindyouthatyou have set a delayed start.

(2)On,litconstantly,eachlight shows which stage of the wash cycle is in progress.

Half load.

Yourdishwasheralsoallowsyouto wash half a load, to save water , electricityanddetergent(useonly halftheamount).

Beforesettingawashcycle,press button "F", indicator light "H" will comeon.

NOTE:Whensetthedishwasher willwashontheupperbasketonly.

To see the settings you have selected

At any time, when the cycle is underway,ifyoupressbutton"F", thecycleinprogressindicatorlight will light up for a few seconds...

followedbythehalfloadindicatorlight ifset.

For your own safety, ensure the door is closed when the dishwasher is not in use.

8

Image 8
Contents Instructions for Installation and Use Ishwasher Contents Electrical Connection For your Safety Do not drink any water residues from inside the dishwasherHeight Adjustment LevellingDrainhoseconnection StandpipeGetting to know your Dishwasher ControlsHow to use your Dishwasher Programme Chart Instructions DescriptionBefore Using your Dishwasher To adjust salt consumption, do as followsWhen to add salt Filling the salt containerCleanerDishes Adding detergentIf it wont close SofterWaterHow to adjust the upper basket Loading your DishwasherLoad examples What goes into the lower basket?Information for Test Labs Care and Cleaning Cleaning the spray armsCleaning the Water Inlet Filter Unplug the applianceTroubleshooting Resolving minor problems yourselfIshwasher Ishwasher Extended Warranties Repair Service and Information Help DeskGenuine Parts and AccessoriesUK 08709 077 Satisfaction guaranteed or your money back Guarantee terms and conditions195040957.00 Repair Service and Information DeskGenuine Parts and Accessories

Instructions specifications

Hotpoint, a well-known brand in the home appliance industry, offers a wide range of products designed to simplify daily chores while ensuring optimal performance. Their user manuals, commonly referred to as "Hotpoint Instructions," provide essential guidelines for operating their various appliances, including refrigerators, washing machines, ovens, and dishwashers. These instructions are not just a source of troubleshooting tips but also an extensive resource to help consumers fully utilize the features and technologies integrated into each appliance.

One of the key features of Hotpoint appliances is their commitment to energy efficiency. Many models are equipped with advanced energy-saving technologies that help reduce power consumption while maintaining performance. This is particularly evident in their washing machines, many of which boast an A+++ energy rating, ensuring minimal environmental impact as well as cost savings on energy bills.

Hotpoint also places a strong emphasis on user-friendly design. Their appliances often incorporate intuitive controls and clear displays, making it easy for users to select settings and monitor their cycles. For instance, the washing machines often feature a digital display that provides information on remaining time and cycle status, alongside an easy-to-navigate dial for program selection.

In terms of innovation, Hotpoint integrates various technologies to improve functionality and performance. For example, their dishwashers may include an "Intensive" wash cycle that targets heavily soiled dishes, and many models are equipped with adjustable racking systems, allowing for flexible loading options tailored to different types of cookware.

Safety features are also a priority for Hotpoint. Many appliances come with child lock functions, ensuring that settings cannot be changed by little hands during operation. Their ovens often include automatic shut-off features that provide an additional layer of safety for users.

Hotpoint appliances are designed with durability in mind, often utilizing robust materials and finishes that withstand the test of time. This focus on longevity makes Hotpoint a reliable choice for consumers looking for quality appliances.

In summary, Hotpoint Instructions provide comprehensive guidance on using their diverse range of household appliances, highlighting features such as energy efficiency, user-friendly interfaces, innovative technologies, safety measures, and durability. By following the provided instructions, customers can unlock the full potential of their Hotpoint products, ensuring that daily cooking, cleaning, and laundry tasks are not only efficient but also enjoyable.