Care and maintenance

Shutting off the water and electricity
supplies
•	Turn off the water tap after every wash cycle to avoid
	leaks.
•	Always unplug the appliance when cleaning it and when
	performing maintenance work.
Cleaning the dishwasher
•	The external surfaces of the machine and the control
	panel may be cleaned using a non-abrasive cloth which
	has been dampened with water. Do not use solvents or
	abrasive products.
•	Any marks on the inside of the appliance may be
	removed using a cloth dampened with water and a little
	vinegar.
Preventing unpleasant odours
•	Always keep the door of the appliance ajar in order to
	avoid moisture from forming and being trapped inside
	the machine.
•	Clean the seals around the door and detergent
	dispensers regularly using a damp sponge. This will
	avoid food becoming trapped in the seals, which is the
	main cause behind the formation of unpleasant odours.
Cleaning the sprayer arms

Clean the water inlet filter at the tap outlet regularly.

-Turn off the water tap.

-Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water.

-Replace the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters, or if the filter is loose.

•After several washes, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below: 1. Turn the cylindrical filter C in an anti-clockwise direction and pull it out (fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the side flaps (fig. 2).

3. Slide out the stainless steel plate filter A (fig. 3).

4. Inspect the trap and remove any food residue. NEVER REMOVE the wash cycle pump (black detail) (fig. 4).

Food residue may become encrusted onto the sprayer arms

and block the holes used to spray the water. It is therefore

recommended that the arms are checked from time to time

and cleaned with a small non-metallic brush.

The two sprayer arms may both be removed.

To remove the upper sprayer

arm, rotate the locking ring in an

anti-clockwise direction.

The upper sprayer arm should be

replaced with the holes facing

upwards.

The lower sprayer arm can be

removed by pressing on the side

tabs and pulling it upwards.

	C
1	2

Cleaning the water inlet filter* If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

*Only available in selected models.

After cleaning the filters, replace the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.

Leaving the machine unused for extended periods

•Disconnect the appliance from the electricity supply and shut off the water tap.

•Leave the door of the appliance ajar.

•When you return, run a wash cycle when the dishwasher is empty.

FDFF specifications

The Hotpoint FDFF is a modern appliance designed to enhance kitchen functionality while maintaining a sleek aesthetic. This fridge-freezer combination stands out due to its efficient use of space, making it an ideal choice for both small and large kitchens. With its impressive storage capacity, the FDFF has been engineered to cater to the needs of busy households.

One of the primary features of the Hotpoint FDFF is its innovative No Frost technology. This advanced system prevents the accumulation of frost by circulating chilled air, ensuring that both the fridge and freezer compartments maintain consistent temperatures. As a result, food stays fresh for longer periods, minimizing waste and enhancing food preservation.

In addition to No Frost, the FDFF features an Energy Efficiency Class of A+, which significantly reduces energy consumption compared to older models. This not only helps to lower household energy bills but also promotes eco-friendly practices, aligning with contemporary emphasis on sustainability.

Another noteworthy characteristic of the Hotpoint FDFF is its adaptable storage solutions. Inside, consumers will find adjustable shelves and a variety of compartments, including door bins and transparent drawers in the freezer section. This design offers flexibility, allowing users to organize groceries according to personal preferences and needs.

The fridge is equipped with LED lighting, which provides better visibility while using less energy. The lights are strategically placed to illuminate every nook and cranny, making it easy to find ingredients quickly, even during late-night snacking sessions.

Furthermore, the FDFF showcases a stylish design with a stainless steel finish that easily complements any kitchen décor. Its built-in handle provides a seamless look while ensuring easy access.

Among its other features, the FDFF includes a temperature alert system that notifies users if the internal temperature rises too high, safeguarding against spoilage. This high-tech alert mechanism works in conjunction with its MultiFlow technology, which enhances air circulation for even cooling throughout the fridge and freezer.

In summary, the Hotpoint FDFF is a perfect blend of innovative technology and thoughtful design. With features like No Frost technology, energy efficiency, customizable storage options, and a chic exterior, it is an excellent choice for any modern home looking to enhance its kitchen experience.