Hotpoint HDA497K Cycle selection hints, What happens in each cycle, Have the door unlatched

●For PLATE WARMER cycle:

a. Load clean plates and dishes to be warmed.

b. Select DRYING HEAT–ON drying option.

c. have the door unlatched.

	LIGHT WASH -
	ON m	. ~,N~E SELECT
	OFF 8	HOLO H:::’&F
	#
	@	WARMER
	PLATE
	■ SfLE~OR”lNOHEAT~
I			I

d. Slowly turn Cycle Indicator Dial clockwise to PLATE WARMER position.

e. Latch the door to start the qcle.

Cycle selection hints

It is important to follow the loading instructions on pages 8 and 9.

NORMAL WASH—For most loads of everyday dishes, glasses and cookware with medium soils.

LIGHT WASH–For dishes that have been pre-rinsedbefore loading. Also, for washing very lightly soiled dishes with soils that have not dried on.

RINSE HOLD—For rinsing partial loads which will be washed later. Select DRYING HEAT– OFF drying option. Do not use detergent.

PLATE WARMER—For warming clean dishes and serving plates for the serving of hot food. -

What happens in each cycle

		Wash
wash	Water Use	Cycle Time
	Gallons	(approx.	Cycle Sequence
Cycl=	(approx.)	minutes)
NO~AL WASH	10.7	,,*	~lFl~lFIFIF]
LIGHT WASH	8.9	51
			mHBBE
RINSE HOLD	5.1	15	EBB

*DRYING HEAT—ON: Add 28 minutes.

●You’ll hear occasional clicking sounds:

–Soft food disposer shredding action.

—Drain valve opening to pump water out.

—Timer control as cycle progresses.

—Detergent cup opening.

c During the drying period:

—The motor stops.

—Water vapor is released through the vent under the door handle. It maybe visible.

5