Hotpoint HDA965 manual Select DryingHeat Option, SelectThe Cycleandstart dishwasher

This leafletcontainsspecific	- ‘Foi		B	.M
operatinginfarmatiqnfor your		BESTRESULT:, ‘ Dishwasher
model.Savethis leafletwith the RmD		AND	BECOME
Use andCare Bookwhich@lso-	~~~!~;~~-		WITH BOTH..
came with your dishwasher;
	,,,		,.

0 Operating Instructions

for~OU~ dishwasher

“24

M	INAW	DELICATE #URtAAL	W	CWIE	DRYING HEAT
mFl	CYCLE	CVCLE CKLE	m	OFF	W	OFF	m~
							potwosher
*		lM[N[m					-,becOnO.120 system
							9
\							J

How tooperate your dishwasher

~Load your dishwasher and add detergent. See your Use and Care Book for instructions. (Be sure the Cycle Indicator Dial is at OFF positiotl before adding detergent.)

❑Select DryingHeat Option

IndicatorLights

~Select SANI=CYCLEOption a. Push selected cycle button b. Latch the door

I ON OFF I

DRYINGHEAT

ON OFF

khL~ m

ON. Turns the drying heater on for fast drying.

OFE Turns the drying heater off to save energy. Dishes dry naturally over a longer period such as overnight.

If you need your dishes sooner, open the dishwasher door after the cycle is complete to reduce the natural drying time.

Use of this option reduces the elec- trical energy used by this model approximately 9~0 for Normal Cycle.

Estimated yearly savings, depending on your local electrical rates, are as follows:

&

“Estimated

-YearlySavings $5.35 $8.55 $11.75

~

SANI-CYCLE maybe used‘withany wash cycle. It raises the water tem- perature in the final rinse portion of the cycle selected. When SANI-CYCLE is selected: The timer will not advance until the water temperature is raised to the proper temperature for SANl- CYCLE rinsing.

❑SelectThe Cycleandstart dishwasher

If yourdishwasher drains into a food waste disposer, operate the disposer until it is empty before starting the dishwasher. (See Cycle selection hints on page 2.)

To obtain the benefits of a complete cycle, be careful that you do not turn the dial any furtherthan net= essaryto start the dishwasher.

@For all cyclesexcept LIGHT WASHand RINSEHOLD:

[ POWER HEAVY DELICATE NORMAL \

I -SCRUB CYCLE CYCLE CYCLE

\\\3

kk~k

10W ENERGY

1

c. Slowly turn Cycle Indicator Dial to ON position to start the cycle,

eFor LIGHTWASHcycle

a.Be suredooris unlatched

b.Push NORMALCYCLE button

c.Slowly turn Cycle Indicator Dial to LIGHT WASH position.

d.Latch door to start the cycle,

. For RINSEHOLDcycle

—

aBe suredooris unlatched.

bSelect DRYING HEATOFF drying option

cSlowly turn Cycle indicator Dial to RINSE HOLD position.

d Latch the door to start the cycle.