Hotpoint HDA799M warranty Cycle selection hinfi, Mat happem in each cycle, For Plate W-R cycle

c For PLATE W-R cycle:

a. Load clean plates and dishes to be warmed.

b. Select DRYING HEAT–ON drying option.

c, Mve the door unlatched.

LIGHT WASH ●

ON ●

OFF b

	●	● RINSE & HOLO
DRYING		● ORVIPLATE WARMER

d. Slowly turn Cycle Indicator Dial clockwise to PLATE WARMER position.

e. Latch the door to start the cycle.

Cycle selection hinfi

It is important to follow the loading instructions on pages 8 and 9.

POTS & PANS—For items such as pots, pans, cookware, dishes and glasses with heavy soil. Everyday dishes may be included.

NORMAL WASH—For most loads of everyday dishes, glasses and cookware with medium soils.

LIGHT WASH—For dishes that have been pre-rinsed before loading. Also, for washing ve~ lightly soiled dishes with soils that have not dried on.

WNSE HOLD–For rinsing partial loads which will be washed later. Select DRYING HEAT– OFF drying option. Do not use

deteqent.

PLATE WARMER–For warming clean dishes and serving plates for the serving of hot food.

mat happem in each cycle

●You’ll hear occasional clicking sounds:

–Sofi food disposer shredding action.

—Drain valve opening to pump water out.

—Timer control as cycle progresses.

—Detergent cup opening

. During the drying period: —The motor stops.

—Water vapor comes through the

vent during drying and when water is being circulated.

		Minimum
		Wash
		Cycle Time
		(approx.		Cycle Sequence
Cycles	] (approx.) minutes)
m & PANS	12.6	5’* HmEmmBm
NO~AL WASH	10.7	55*	mwmwmw
LIGHT WASH	8.9	42*
				Bmmmm
WNSE HOLD	3.6	11		MM

*DRYING HEAT—ON: Add 29 minutes.

5