Hotpoint 51110 manual Troubleshooting, Problem Possible causes / Solutions

Page 16

Troubleshooting

GB

Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem:

Possible causes / Solutions:

 

 

The dishwasher does not start or cannot be

• Switch off the appliance by pressing the ON/OFF button, switch it back

 

 

controlled.

on after approximately one minute and reset the cycle.

 

 

 

• The appliance has not been plugged in properly.

 

 

 

• The dishwasher door has not been shut properly.

 

 

The door won’t close.

• The lock was released. Strongly push the door until a “clacking” noise is

 

 

heard.

 

 

No water drains from the

• The dishwasher cycle has not yet finished.

 

 

dishwasher.

• The water drain hose is bent (see Installation.)

 

 

 

• The drain duct is blocked.

 

 

 

• The filter is clogged up with food residues.

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

 

 

noise.

• An excessive amount of foam has been produced: the detergent has not

 

 

 

been measured out correctly or it is not suitable for use in dishwashers

 

 

 

(see Start-up and use.)

 

 

The dishes and glasses are covered

• The level of refined salt is low or the dosage setting is not suitable for

 

 

in a white film or limescale deposits.

the hardness of the water (see Rinse aid and salt.)

 

 

• The lid on the salt dispenser is not closed properly.

 

 

 

• The rinse aid has been used up or the dosage is too low.

 

 

The dishes and glasses are streaked

• The rinse aid dosage is too high.

 

 

or have a bluish tinge.

 

 

 

The crockery has not been dried

• A wash cycle without a drying cycle has been selected.

 

 

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid

 

 

 

and salt.)

 

 

 

• The rinse aid setting is not suitable.

 

 

 

• The crockery is made from non-stick material or plastic.

 

 

The crockery is not clean.

• The racks are overloaded (see Loading the racks.)

 

 

 

• The crockery has not been arranged well.

 

 

 

• The sprayer arms cannot rotate freely.

 

 

 

• The wash cycle is too gentle (see Wash cycles.)

 

 

 

• An excessive amount of foam has been produced: the detergent has not

 

 

 

been measured out correctly or it is not suitable for use in dishwashers

 

 

 

(see Start-up and use.)

 

 

 

• The lid on the rinse aid compartment has not been shut correctly.

 

 

 

• The filter is dirty or blocked (see Care and maintenance.)

 

 

 

• The refined salt level is low (see Rinse aid and salt.)

 

 

The dishwasher does not take any

• There is no water in the mains supply.

 

 

water in - Tap shut-off alarm (short

• The water inlet hose is bent (see Installation.)

 

 

beeps are heard)*

• Turn on the tap and the appliance will start after a few minutes.

 

 

(the ON/OFF indicator light flashes,

• The appliance lock has been activated because no action was taken

 

 

when the beeps sounded.

 

 

the “Tap shut-off” symbol is lit

 

 

Switch off the machine using the ON/OFF button, turn on the tap and

 

 

and the display shows the text:

switch the machine back on after a few seconds by pressing the same

 

 

No water. Turn tap on. After a few

button. Re-program the appliance and restart the wash cycle.

 

 

seconds F 06 appears.)

 

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the

 

 

filter blocked

water tap to eliminate the risk of flooding and remove the plug from the

 

 

(the ON/OFF indicator light flashes, the

electrical socket.

 

 

Make sure the water inlet filter has not become blocked by impurities

 

 

“Filter” symbol is lit and the display shows

 

 

(see “Care and maintenance” chapter.)

 

 

the textF 07.)

 

 

 

*Only available in selected models.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Contents Instructions for useProduct Fiche HotpointPrecautions and safety advice General safetyDisposal of old electrical appliances Saving energy and respecting the environmentRecycling & Disposal Information Positioning and levelling InstallationElectrical Connection Connecting the water supplies Connecting the water inlet hoseSink Waste System Anti-condensation stripAdvice regarding the first wash cycle Settings buttonChild safety lock Anti-flooding protectionControl Panel Description of the applianceDisplay Loading the racks Lower rackUpper rack TipsAdjusting the height of the upper rack Third rackUnsuitable crockery Damage to glass and crockeryStarting the dishwasher Start-up and useMeasuring out the detergent Wash cycles Wash cycleSpecial wash cycles and Options Wash optionsRinse-aid dispenser setting Setting the water hardnessRinse aid and refined salt Measuring out the rinse aidCare and maintenance Troubleshooting Problem Possible causes / SolutionsAfter Sales Service After Sales ServiceParts and Accessories Essential Contact InformationGuarantee Months Parts and Labour GuaranteeYear Parts Guarantee Extended GuaranteesPage 195109487.03

51110 specifications

The Hotpoint 51110 is a versatile and reliable freestanding fridge freezer designed to enhance your kitchen experience while providing ample storage space for your groceries. This appliance combines modern aesthetics with thoughtful features, making it a popular choice for families and individuals alike.

One of the main features of the Hotpoint 51110 is its generous capacity. With a total storage volume of 200 liters for the fridge and 70 liters for the freezer, this appliance offers enough space to accommodate large grocery purchases and bulk items. The fridge section is well-organized, featuring adjustable shelves that allow users to customize the interior layout to fit various items, ranging from fresh vegetables to large containers.

The Hotpoint 51110 utilizes the innovative No Frost technology, which prevents ice buildup in the freezer compartment. This feature not only eliminates the need for manual defrosting but also ensures efficient cooling, maintaining a consistent temperature and optimal conditions for food preservation. Users can enjoy the convenience of frost-free functionality while knowing that their frozen goods are stored in ideal conditions.

In terms of energy efficiency, the Hotpoint 51110 boasts an impressive A+ energy rating. This means it consumes less electricity compared to standard models, helping homeowners save on energy bills while minimizing their environmental impact. With energy-efficient appliances becoming increasingly important, the Hotpoint 51110 is a commendable option for eco-conscious consumers.

Another notable characteristic of the Hotpoint 51110 is its user-friendly design. The appliance features an intuitive control panel, making it easy for users to adjust temperatures and settings according to their preferences. Additionally, the internal LED lighting provides clear visibility of all contents, ensuring that items are easily accessible.

This model also includes advanced antibacterial features, which inhibit the growth of harmful bacteria within the refrigerator. This ensures that food stays fresher for longer periods, ultimately enhancing food safety and hygiene.

Overall, the Hotpoint 51110 is a well-rounded fridge freezer, offering a blend of spaciousness, innovative technologies, and energy efficiency. Whether you are storing fresh produce, frozen meals, or everyday essentials, this appliance stands out as a functional and reliable addition to any kitchen. With its modern design and practical features, the Hotpoint 51110 makes food storage simple and effective.
Top Page Image Contents