Hotpoint BCI45 manual Troubleshooting, Resolving minor problems yourself

Page 15

D ISHWASHER

Troubleshooting

Caution

-Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment damage, as well as danger to the user.

-The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out. Switch off at the mains socket and water supply and remove the plug.

Resolving minor problems yourself.

Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again that much sooner. The following list of common occurences and their remedies should help you identify the causes of most problems.

If the dishwasher won't

start, check...

■Isthedishwasherpluggedinat the electricity socket and switchedon?

■Is there a power failure, check otherappliances.

■Checkthefuse.

■Is the water supply tap turned on?

■Isthewaterinlethoseconnected properly?

■Is the pressure of the water supplysufficient?

■Istheinlethosekinked?

■Is the filter on the water supply hoseblocked?

■Isthedishwasherdoornotclosed properly?

If water remains inside the

dishwasher, check...

■thedrainhoseisnotkinked.

■the drain syphon is not obstructed.

■the dishwasher filters are not clogged.

If the dishes are not being

cleaned properly, check...

■thecorrectamountofdetergent hasbeenadded.

■thereisregeneratingsaltinthe saltcontainer.

■the dishes have been loaded correctly.

■the selected programme is suitableforthetypeofdishesand thedegreeofsoiling.

■allfiltersarecleanandpositioned correctly.

■the spray arm nozzles are not obstructed.

■thereisnothingobstructingthe rotationofthesprayarms.

If the dishes fail to dry or

remain dirty, check...

■thereisrinseaidinsidetherinse aidcontainer.

■therinseaiddispensersettingis correct.

■the detergent being used is of goodqualityandhasnotlostits effectiveness (for example, throughincorrectstorage,with theboxleftopen).

If the dishes show signs of streaking, staining etc. check...

■therinseaiddispensersettingis notsettoohigh.

If there are visible traces of rust inside the tank, check...

■the cap off the salt container is securely closed and that the watersoftnersettingiscorrect.

■thecorrectamountofdetergent isbeingused.Certaindetergents can be more corrosive than others.

■the tank is made of steel and thereforeanyrustmarksaredue toexternalelements(fragments ofrustfromthetankpipes,pots, cutleryetc.)Specialproductsare commerciallyavailabletoremove suchmarks.

Error messages

Yourdishwasherisequippedwitha safety system which is able to de- tectoperatingfaults.

Thesefaultsarereportedbyoneor twocycleindicatorlights"M"flash- ingrapidly.Takeanoteofwhichlights areflashing,turntheapplianceoff andcallHotpointServicefortechni- calassistance.

Tap off alarm

Ifyouhaveforgottentoturnthewa- ter tap on, your appliance will re- mindyouofthisbysoundingafew shortbeepsforafewminutes.Turn the tap on and your appliance will startupagainafterafewminutes. Wereyoutobeabsentwhenthese beepsaresounded,theappliance will be blocked automatically and cycle3and4indicatorlights(rapid and soak cycle) will flash rapidly. Turn the appliance off at the ON- OFF button, turn on the water tap andwaitapproximately20seconds beforeturningtheapplianceback on.

Re-select the wash cycle and the appliancewillstartupagain.

If after all the checks, the appli- ance still does not operate or the problem persists, call Hotpoint Service (see KEY CONTACTS, backpage)andinformthemof:

-thetypeofproblem

-theabbreviationofthemodel name (Mod.)andtherelativenumbers(S/

N)writtenontheratingplate located on the inner edge of the door.

Switch off at the mains socket and remove the plug. Turn off the water supply.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Instructions for Installation and Use Page Contents Page Fuses Electrical ConnectionDONOTremovetheratingplate For your SafetyHeight Adjustment LevellingStandpipe Controls Getting to know your DishwasherCycle end How to use your DishwasherFirst of all Modifying a wash cycle in progressZdvk Programme ChartBefore Using your Dishwasher Adjusting the water softenerFilling the salt container 15 gr Cleaner DishesAdding detergent If it wont closeWhat goes into the upper basket? How to adjust the upper basketLoading your Dishwasher What goes into the lower basket?Unplug the appliance Care and CleaningCleaning the spray arms Cleaning the Water Inlet FilterResolving minor problems yourself TroubleshootingRinse aid Lower rack Load cutlery basketDetergent Loading the detergentRepair Service and Information Help Desk Genuine Parts and AccessoriesUK 08709 077Extended Warranties Guarantee terms and conditions Satisfaction guaranteed or your money backPage Repair Service and Information Desk Genuine Parts and Accessories195.036.722.00

BCI45 specifications

The Hotpoint BCI45 is a standout appliance in the realm of built-in cooking products, designed to meet the needs of contemporary kitchens. Featuring a sleek, modern design, the BCI45 excels in both functionality and style, making it an ideal choice for home chefs who value efficiency without compromising aesthetics.

One of the main features of the Hotpoint BCI45 is its multifaceted cooking options. This built-in appliance includes a versatile oven with multiple cooking functions, such as conventional cooking, fan-assisted heating, and grill settings. This allows users to prepare a wide variety of dishes, from roasts to pastries, ensuring optimal cooking results every time. The fan-assisted cooking function helps distribute heat evenly throughout the oven cavity, leading to perfectly cooked meals without the hassle of rotating dishes.

The BCI45 also prioritizes energy efficiency, an increasingly important consideration for modern homeowners. Boasting a high energy rating, this oven minimizes energy consumption while delivering powerful performance. The intelligent design not only helps keep utility costs down but also contributes to a more eco-friendly kitchen.

Another highlight of the Hotpoint BCI45 is its advanced cleaning technology. The appliance features a built-in self-cleaning program that uses pyrolytic technology to burn off food residues, transforming them into ash that can be easily wiped away. This innovative feature saves time and effort, allowing users to maintain a clean and hygienic cooking environment with minimal hassle.

Safety is also a priority with the BCI45, as it includes a range of safety features designed to protect users. These features include a cool-touch door, ensuring that the exterior remains safe to touch even during intense cooking sessions, as well as an automatic shut-off function that activates in the event of overheating.

Furthermore, the Hotpoint BCI45 is designed with user-friendly controls and a clear display, making it easy to monitor cooking progress and adjust settings. The intuitive interface ensures that users of all experience levels can navigate the oven with ease, enhancing the overall cooking experience.

In summary, the Hotpoint BCI45 is a highly functional and energy-efficient built-in oven that combines modern design with advanced cooking technologies. With its versatile cooking options, self-cleaning capabilities, and enhanced safety features, it is an excellent addition to any kitchen, aimed at simplifying the cooking process while delivering exceptional results.
Top Page Image Contents