Hotpoint BFI68 manual Levelling, Height Adjustment, Anti-flooding protection, Standpipe

Page 7

D ISHWASHER

Installation

Choose where you want to install your dishwasher, you can place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is providedwithwatersupplyanddrain hoses, which can be directed towards the left or right to facilitate appropriateinstallation.

Levelling.

Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. Make sure that it is not inclined more than 2 degrees. If the applianceislevel,itwill helpensure its correct operation.

Height Adjustment

Insert the appliance into the cutout andthenadjusttheheightusingthe screws located on the front bottom part of the machine. Use a screwdriver to turn the screws in the clockwise or anti-clockwise direction to increase or decrease the height respectively.

Cold water connection. Connect the cold water supply hose, inserting the small filter supplied with the dishwasher and makingsurethatitisfastenedtightly in place (see figure 2). If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher.

A

Fig.2

Anti-flooding protection

Your dishwasher has a special system which stops the water supply in the event of leaks inside theappliance.

It is equipped with a water inlet that has a clear outer hose and an inner high pressure hose which turns bright red if it breaks.

Leaks are prevented as the clear outer hose now contains the water. It is vital that you check it on a regularbasis,ifyouseeithasturned bright red, you know you need to replace it as soon as possible.

Call for an authorised technical engineer to come and replace it.

Drain hose connection. WARNING: Connect your dishwasher drain hose to pipes which connect to the foul drain system and not to surface water drains.

IMPORTANT: For the correct operation of your dishwasher, it is essentialtocomplywiththefollowing information:-

Standpipe:

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with‘retainingflaps’,ensuretheyare insertedfullyintothestandpipe. This will prevent the pipe from jumping out during installation and use.

DONOTpositionthestandpipenear an electrical outlet.

ENSURE that the drain hose is not kinked and it is routed as shown in thediagram.

The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your householdsink.

It MUST NOT be connected to a surface water drain.

Sink Waste System: For under sink drainage:

Before connecting the drain hose, remove any internal restrictions - This will prevent a build up of debris which could cause a blockage.

Remove any restrictions from the waste spigot and ensure that the sealingbungisremoved.Thehose should be routed, such that it is raised to a minimum height of 800mm(31/2”).

NOTE: Ensure the sink outlet pipe has a minimum diamtere of 32mm.

1.Untie the end of the GREY drainage hose from the rear of the appliance.

2.Reposition the ‘Hooked End Support’ as required along the GREY drainage hose.

3.If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

4.Attach the GREY drainage hose to the under sink waste disposal unit securely, using the clip and rubber tube supplied.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Instructions for Installation and Use Page Contents Page Electrical Connection Do not drink any water residues from inside the dishwasher For your SafetyStandpipe Height AdjustmentLevelling Anti-flooding protectionControls Getting to know your DishwasherHow to use your Dishwasher 3URJUDPPH Programme ChartClockwise from the setting to the + setting Before Using your DishwasherAdjusting the water softener To adjust salt consumption, do as follows25 gr Cleaner DishesAdding detergent If it wont closeLoading your Dishwasher Unplug the appliance Care and CleaningCleaning the spray arms Cleaning the Water Inlet FilterResolving minor problems yourself TroubleshootingLoading the Rinse Aid DetergentLoading the Detergent Rinse AidGenuine Parts and AccessoriesUK 08709 077 Repair Service and Information Help DeskExtended Warranties Guarantee terms and conditions Satisfaction guaranteed or your money backPage 195.036.721.00 Repair Service and Information DeskGenuine Parts and Accessories January 2003 Part no. FP150

BFI68 specifications

The Hotpoint BFI68 is an advanced integrated refrigerator that combines sleek design with modern technology, making it an excellent choice for discerning homeowners looking to optimize their kitchen space while enjoying superior food preservation. This model stands out due to its combination of practicality, efficiency, and smart features.

One of the main highlights of the Hotpoint BFI68 is its impressive storage capacity. With a net volume of 233 liters, this fridge offers ample space for storing fresh produce, dairy products, and leftovers. The appliance is thoughtfully designed to accommodate larger items, thanks to adjustable shelving and spacious door bins. This flexibility ensures that users can organize their foods according to their preferences and easily retrieve what they need.

Another key characteristic of the Hotpoint BFI68 is its advanced No Frost technology. This feature effectively prevents the build-up of ice inside the fridge, which means users do not have to manually defrost the appliance. As a result, food stays fresher for longer, and the overall maintenance of the fridge becomes significantly easier. Additionally, the No Frost technology ensures consistent temperature distribution throughout the unit, providing optimal conditions for all stored items.

The BFI68 also boasts an energy efficiency rating of A+, which speaks to its environmentally friendly design. This means that it consumes less electricity compared to less efficient models, ultimately leading to cost savings on energy bills. This feature is particularly appealing for eco-conscious consumers looking to reduce their carbon footprint while enjoying quality appliances.

Moreover, the Hotpoint BFI68 is equipped with Smart Technology, which enhances its usability. Users can enjoy features like a fast cooling function, which quickly lowers the fridge temperature after groceries are added. The appliance also includes a temperature alarm that alerts users if the internal temperature rises too high, protecting valuable food items.

In terms of design, the Hotpoint BFI68 features a seamless integrated look, allowing it to blend effortlessly into kitchen cabinetry. The minimalist aesthetic, coupled with a user-friendly interface, makes it an attractive addition to any modern kitchen.

In summary, the Hotpoint BFI68 refrigerator is an excellent choice for those seeking a combination of practicality and innovative technology. With its generous storage capacity, No Frost technology, energy efficiency, and sleek design, it promises to meet the demands of contemporary life while ensuring that food stays fresher for longer.
Top Page Image Contents