Electrical Connection

Power supply voltage and frequency: 220-240V a.c.

GB 50/60Hz.

!The supply cable must be positioned so that it never reaches at any point a temperature 50°C higher than the room temperature. The cable must be routed away from the rear vents. Should you require it, you may use a longer cable, however, you must ensure that the cable supplied with the appliance is replaced by one of the same specifications in accordance with current standards and legislation.

Your appliance is supplied with a 13 amp fused plug that can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

!THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a cable extension or to re-route the mains cable through partitions, units etc., please ensure that either:

• the plug is replaced by a fused 13 amp re- wireable plug bearing the BSI mark of approval.

or:

•the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Please note: for appliances with a rating greater

than 13 amp (eg: electric hob, double ovens and freestanding electric cookers etc.) the mains cable must be wired into a cooker output point with a rating of 45 amp. In this case the cable is not supplied.

Disposing of the plug

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug:

!The wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	- Earth
Blue	- Neutral
Brown	- Live

If the colours of the wires in the mains lead do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Connect Green & Yellow wire to terminal marked “E”

or					or coloured Green or Green & Yellow.

Connect Brown wire to terminal marked “L” or coloured Red.

Connect Blue wire to terminal marked “N” or coloured Black.

If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse. A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board. If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

How to connect an alternative plug

The wires in this mains lead are coloured in accordance with the following code:

BLUE			“NEUTRAL” (“N”)
BROWN			“LIVE” (“L”)
GREEN AND YELLOW			“EARTH” (“E”)

	GREEN &
	YELLOW
	BROWN	13 amp fuse
	BROWN
	BLUE	CROSS-BAR
		CORD GRIP

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

GP641X specifications

The Hotpoint GP641X is a versatile and stylish gas hob that perfectly combines modern design with high-performance cooking technology. Its sleek stainless steel finish not only enhances the aesthetic appeal of any kitchen but also ensures easy cleaning and durability. This model is constructed with attention to detail, making it a popular choice for both professional chefs and home cooks alike.

One of the standout features of the Hotpoint GP641X is its four gas burners, providing ample cooking space for various pots and pans. With different burner sizes, including a high-speed burner for rapid boiling and a simmer burner for delicate sauces, users can efficiently manage multiple dishes simultaneously. The burners are designed to deliver consistent heat distribution, ensuring even cooking results every time.

The hob is equipped with an automatic ignition system, which means that lighting the burners is as simple as turning the knob. This feature not only enhances convenience but also adds an element of safety. The control knobs are conveniently located at the front, allowing for easy access and adjustment while cooking.

Safety is a paramount consideration in the design of the Hotpoint GP641X. The hob features a flame failure device that automatically cuts off the gas supply if the flame accidentally goes out, safeguarding against potential hazards.

In addition to its robust functionality, the Hotpoint GP641X is designed with a compact footprint, making it ideal for smaller kitchens or those looking to maximize space without sacrificing performance. The hob is compatible with various cookware types, including traditional cast iron and modern stainless steel.

Moreover, the GP641X is designed for energy efficiency, helping users save on utility bills while minimizing their environmental impact. With its user-friendly interface and quality build, this gas hob is not just an appliance; it's a reliable partner in the kitchen.

In summary, the Hotpoint GP641X stands out with its stylish design, powerful burner options, advanced safety features, and energy efficiency. It caters to all cooking styles and preferences, making it an excellent choice for anyone looking to upgrade their kitchen. With the GP641X, cooking becomes an enjoyable and efficient experience, making it a worthy investment for any culinary enthusiast.