Hotpoint RGA720, RGA724 owner manual When ALL Hookups are Completed, Mobile Home Installation

Page 33

Installation Instructions

12INSTALL THE ANTI-TIP DEVICE (cont.)

DFor wood construction, drill a pilot hole at an angle of 20° from the horizontal.

A nail or awl may be used if a drill is not available.

Mount the Anti-Tip device with the screw provided.

For cement or concrete construction, you will need a 1/4x 112lag bolt and a 1/2O.D. sleeve anchor, which are not provided. Drill the recommended size hole for the hardware.

Wallboard

Back of

 

range

Anti-Tip

 

device

 

Wood screw

 

Install the sleeve anchor into the drilled hole and then install the lag bolt through the device. The bolts must be properly tightened as recommended for the hardware.

ESlide the range against the wall, and check for proper installation by grasping the front edge of the cooktop and carefully attempting to tilt the range forward.

WHEN ALL HOOKUPS ARE COMPLETED

Make sure all controls are left in the OFF position. Make sure the flow of combustion and ventilation air to the range is unobstructed.

Mobile Home Installation:

Be sure the installation of this range in a manufactured or mobile home conforms with the Manufactured Home Construction and Safety Title 24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety Title 24, H.U.D.

(Part 280)] or when such standards are not applicable, the Standard for Manufactured Home Installations 1984 (Manufactured Home Sites Communities and Set-Ups), ANSI A225.1-latest edition, or with local codes. In Canada, mobile home installation must be in accordance with the current CAN/CSA Z240/MH Mobile Home Installation Code.

Model and Serial Number Location:

The serial plate for your range is located under the cooktop. See the Lift-Up Cooktop section in this manual for instructions on how to lift the cooktop. See the Lift-Up Cooktop section in this manual for instructions on how to lift the cooktop. In addition to the model and serial numbers, it tells you the ratings of the burners and type of fuel and pressure for which the range was adjusted when it left the factory.

When ordering parts, always include the model number and serial number to ensure proper replacement parts. Parts may be obtained through General Electric/Hotpoint Factory Service Centers or General Electric/Hotpoint authorized Customer Care® servicers.

CONVERT TO LP GAS (or convert back to natural gas from LP)

This range leaves the factory set for use with natural gas. If you want to convert to LP gas, the conversion must be performed by a qualified LP gas installer.

The conversion instructions and LP orifices can be found attached to the back of the range.

Keep these instructions and the orifices in case you want to convert back to natural gas.

33

Image 33
Contents 20″ and 24″ Compact Gas Ranges What to do if YOU Smell GAS Ge.com Safety Instructions Operating Instructions CareInstallation of the range section Cook Meat and Poultry THOROUGHLY… Surface Burners Operating Instructions Installation InstructionsInstallation Instructions Care and Cleaning Using the gas surface burnersInstructions Surface Lighting Instructions for Electric Ignition ModelsInstructions Operating Top of Range Cookware How to Select Flame SizeUsing the oven Oven Shelf Positions Oven VentsType of margarine will affect baking performance Using the oven for baking Care and Cleaning Don’t Peek Cookies SafetyPies CakesAdjust the oven thermostat-Easy to do yourself Using the oven for roastingSafety Instructions How to Set the Oven For RoastingSafety Instructions How to Set Your Oven for Broiling Using the oven for broilingBroiler Compartment Use of Aluminum FoilComments Broiling GuideLift-Up Cooktop Care and cleaning of the rangeBurner Grates Tips Consumer SupportBurners Cleaning Operating Instructions SafetyControl Panel and Knobs Oven Shelves and Broiler RackCleaning Installation Instructions Broiler Compartment Cleaning the Oven BottomRemovable Oven Bottom To removeLift-Off Oven Door Instructions Safety Broiler Pan and GridTo remove the door Inside of doorPainted Surfaces Porcelain Oven Interior SafetyBefore YOU Begin Commonwealth of MassachusettsTools YOU will Need For Your SafetyPart Included Materials YOU MAY NeedInstallation Safety Instructions 36″ Dimensions and ClearancesLocation ANTI-TIP DeviceProvide Adequate GAS Supply Connect the Range to GASFlexible Connector Recommended GAS and Electric Supply LocationHookup Example Light the Pilots Seal the OpeningsAdjust the Surface Burner Pilots if Necessary Adjust the Oven Burner AIR Shutter if NecessaryIf the Range has Electric Ignition For Natural GasQuality of Flames If Adjustment is NecessaryReplace Oven Parts For LP GasInstall the ANTI-TIP Device Level the Range⁄ 8 ″ When ALL Hookups are Completed Mobile Home InstallationModel and Serial Number Location Before you call for service… What is Not Covered Gas Range WarrantyCare and Cleaning We Will ReplaceParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio
Related manuals
Manual 36 pages 43.9 Kb

RGA720, RGA724 specifications

The Hotpoint RGA724 and RGA720 are standout models in the realm of freestanding gas ranges, designed to deliver exceptional cooking performance and user-friendly features. Both models blend modern technology with a classic design that fits seamlessly into various kitchen aesthetics.

One of the main features of the Hotpoint RGA724 and RGA720 is their powerful cooktop configuration. These ranges typically offer four burners with varying heat outputs, allowing home cooks to achieve precise cooking results. The burners include a high-output option, perfect for tasks that require rapid heating, such as boiling water or searing meats, while lower-output burners are ideal for simmering sauces or cooking delicate dishes.

Both the RGA724 and RGA720 are equipped with a spacious oven space that provides ample room for cooking multiple dishes simultaneously. The ovens feature a conventional baking system that ensures even heat distribution, promoting consistently baked goods and perfectly roasted meals. An additional highlight is the self-cleaning option, which allows users to maintain their range with minimal effort, making oven maintenance a hassle-free experience.

Another key technological advancement found in both models is the gas oven's precise temperature control. Adjusting the temperature is smooth and straightforward, ensuring that culinary enthusiasts can replicate recipes with accuracy. Additionally, both models feature a broiler unit, allowing for versatile cooking techniques from browning and melting cheese to quick cooking finishes.

The Hotpoint RGA724 and RGA720 also emphasize user convenience with their intuitive control panels. The knobs and digital displays are designed for easy readability and operation, enhancing the overall cooking experience. Moreover, these models often include a built-in ignition system that ensures quick and reliable burner lighting, eliminating the need for matches or lighters.

Safety is a priority with Hotpoint ranges, as demonstrated by their flame failure device, which automatically turns off the gas supply if a burner goes out. This feature provides peace of mind to users, particularly families with children.

In summary, the Hotpoint RGA724 and RGA720 models excel in both performance and functionality, making them an excellent choice for anyone looking to elevate their cooking experience. With their robust build, advanced features, and thoughtful safety elements, these gas ranges stand as reliable kitchen companions for everyday culinary adventures.