Using your Sunbeam Burr Grinder (continued)
8.Plug the power cord into a
9.Turn the power switch on the Sunbeam Burr Grinder to ‘ON’, the switch will illuminate, see figure 4.
Figure 4
Note: Ensure that the lid on the portion- control container or grinding bowl is secure and in place.
10.Push the ‘GRIND’ button for 2 seconds and release. The Sunbeam Burr Grinder will grind all the beans in the grinding bowl, once empty it will then stop automatically.
Note: Oily beans may stick together and not feed into the burrs. This can cause the automatic sensor to turn off the grinding action. Should this occur, just tap the housing of the Sunbeam Burr Grinder a few times to loosen up the beans and push the ‘GRIND’ button again to resume grinding.
11.While still positioned in the grinder, tap the ground coffee container a few times, this allows the ground coffee to settle down into the container. Now, slowly remove the container from the Sunbeam Burr Grinder, see figure 5. Before removing the lid to the ground coffee container, tap the container again a few times to settle more of the ground coffee, see figure 6.
Figure 5
Figure 6
6