Bose Speakers manual Cleaning your speakers, Troubleshooting, Technical information

Page 7

Reference

Cleaning your speakers

Use a damp cloth to clean your 161speakers. Do not use harsh chemicals or household cleaners. Do not apply liquids directly to the speakers. If you vacuum the front grille of the speakers, do so carefully.

Troubleshooting

If you experience problems with your 161 speakers, the following suggestions may help. If you need additional help, contact your authorized Bose® dealer, or contact Bose directly.

Problem

What to do

 

 

Neither speaker

Check the settings on your receiver or amplifier. Refer to the owners

plays

guide that came with it for instruction on settings.

 

 

Bass or treble is

Check the tonal balance setting on your receiver or amplifier.

weak

 

 

 

Only one speaker

• Check the balance control on your receiver or amplifier.

plays

• Check the wires connected to the speaker that does not play. Make

 

sure the wires are in good condition and are firmly connected. See

 

page 5.

 

 

One speaker still

• Disconnect the wires from both the speaker and the receiver or

does not play

amplifier. Disconnect the other cord from its speaker, and connect

 

that end of the cord to the speaker that doesn’t play.

 

• If the speaker still doesn’t play, the problem is in the speaker. If the

 

speaker now plays, continue checking for the source of the problem.

 

• Disconnect the same cord from the amplifier or receiver. Connect it

 

to the other outputs on the amplifier or receiver.

 

• If the speaker plays, the problem is in the original cord that was con-

 

nected to that speaker. If the speaker does not play, the problem is in

 

that channel of the receiver.

 

 

Technical information

Quality standard: Syncom® computer quality control

Driver complement: Two (2) 2.5" (6.3 cm) wide-range drivers per speaker

Enclosure: Tuned port, molded ABS resin

Dimensions: 4.17"H x 10.93"W x 4.98"D (10.6 cm x 27.8 cm x 12.6 cm)

Compatibility: Rated 50W IEC; compatible with amplifiers or receivers rated 10-100 watts per channel, rated 4-8 ohms

Wire recommendations: Based on a maximum frequency response deviation of ±0.5 dB.

Gauge

Length

18

(0.75 mm2)

30 ft (9 m) maximum

16

(1.5 mm2)

45 ft (14 m) maximum

14

(2.0 mm2)

70 ft (21 m) maximum

Weight: 8 lbs. (3.6 kg) per pair, in the carton

AM257524_01_V.pdf

October 26, 2001

7

Image 7
Contents Bose 161TM Speakers Declaration of conformity Before you begin Where to find …For your records Placing your Bose 161 speakers UnpackingChoosing speaker cord Connecting speaker cord to your receiver or amplifier Connecting speaker cord to the speakersPreparing speaker cord Mounting your speakers on a wall Testing speaker connectionsTroubleshooting Cleaning your speakersTechnical information Reference Drilling template Wood wall October 26