Using the Memo function
It is important to change your filter cartridge regularly to enjoy the benefits of filtered water and keep your kettle scale free.
The BRITA Memo system automatically reminds you when your filter cartridge needs to be changed.
When you have fitted and prepared your filter cartridge, start the Memo system as follows:
•Press and hold the Start button until 4 bars appear on the display and flash twice. The Memo is now set. The flashing dot in the corner of the display indicates that the Memo is working. See figure 5.
•At the end of every two weeks, one bar will disappear to indicate the remaining cartridge life. When only one bar is showing, check that you have a replacement filter cartridge available. See figure 6.
�����
�
���
��
��
��
�����
�
���
��
��
��
BRITA®
Figure 5
It is important to change your filter cartridge regularly to enjoy the benefits of filtered water and keep your kettle scale free.
The BRITA Memo system automatically reminds you when your filter cartridge needs to be changed.
When you have fitted and prepared your filter cartridge, start the Memo system as follows:
•Press and hold the Start button until 4 bars appear on the display and flash twice. The Memo is now set. The flashing dot in the corner of the display indicates that the Memo is working. See figure 5.
BRITA®
Figure 6
•After 8 weeks, all four bars will disappear and a flashing arrow will appear to indicate that the cartridge should be replaced. See figure 7.
Wash and dry the filter funnel, insert a new cartridge (see 'Preparing the filter cartridge for use') and restart the Memo as described above.
�����
�
���
��
��
��
BRITA®Figure 7
Note: The Memo system is only intended to be used with BRITA filter cartridges.
11