Sunbeam KE1400, KE1600B manual Care and Cleaning, Removal of mineral deposits, Alternatively

Page 10

Care and Cleaning

Always remove the plug from the power outlet before cleaning.

Never immerse the kettle switch area, cord or powerbase in water, or allow moisture to come into contact with these parts.

Removal of mineral deposits.

Mineral deposits in tap water may cause the interior to discolour. To remove this build- up, use Sunbeam Liquid Descaler, a simple to use, non-toxic cleaner available from Sunbeam Appointed Service Centres.

Alternatively:

1.Fill the kettle with 3 cups of white vinegar and the remainder with water and allow to stand overnight. DO NOT BOIL.

2.Empty the solution from the kettle. Any stains remaining inside the spout can be removed by rubbing with a damp cloth. Fill the kettle with clean water, bring to boil and then discard the water. Repeat and the kettle will then be ready to use.

The outside of the kettle can be wiped over with a damp cloth.

CAUTION: Do not use chemicals, steel wool, or abrasive cleaners to clean the outside of the kettle.

To clean the mesh filter

Grasp the top of the mesh filter and pull upwards to remove. Wash in warm soapy water and dry thoroughly before replacing in the kettle.

8

Image 10
Contents Express Kettle Contents Important instructions retain for future useSunbeam’s Safety Precautions Safety Precautions for Your KettleLitre capacity Way Safety SystemEasy fill spout Robust one-piece designErgonomic On/Off boil switch with auto cut-outRemovable cord Features of your Express Kettle KE1600 & KE1600B Power base Cord exits Cord storage cavityUsing your kettle Using your Express KettleBefore using your kettle Cord Storage FacilityCut-out for boil-dry protection Sunbeam’s 3 Way Safety SystemAutomatically switch off after boiling Shut-down in case of overheatingRemoval of mineral deposits Care and CleaningTo clean the mesh filter AlternativelyPage Page Page Page Australia New ZealandNeed help with your appliance?