Whirlpool UXT4030AY, UXT4036AY Installation Instructions, Prepare Location, Install Range Hood

Page 6

INSTALLATION INSTRUCTIONS

Prepare Location

NOTE: Before making cutouts, make sure there is proper clearance within the ceiling or wall.

1.Disconnect power.

2.Select a flat surface for assembling the range hood. Place covering over that surface.

3.Lift the range hood and set it upside down onto covered surface.

4.If cabinet has recessed bottom, add wood filler strips on each side. Install screws to attach filler strips in locations shown.

Wood filler strips (recessed cabinet bottoms only)

3" (7.6 cm)

Cabinet

bottom

3" (7.6 cm)

Wall

Determine Wiring Hole Location

Cut only one 1¹⁄₄" (3.2 cm) diameter wiring access hole.

1.Determine and clearly mark a vertical centerline on the wall and cabinet in the area the vent opening will be made.

A

A. Centerline

To wire through top:

1.Mark a line distance “A” from the right of the centerline on the underside of the cabinet. Mark the point on this line that is

2" (5.1 cm) from back wall. Drill a 1¼" (3.2 cm) diameter hole through the cabinet at this point.

A

2" (5.1 cm)

 

from wall,

 

not cabinet

 

frame

Centerline

A. 8³⁄₈" (21.3 cm)

To wire through wall:

1.Mark a line distance “A” from the right of the centerline on the underside of the wall. Mark the point on this line that is ⁷⁄₈" (2.2 cm) from the underside of the cabinet. Drill a 1¹⁄₄"

(3.2 cm) diameter hole through the rear wall at this point.

⁷⁄₈" (2.2 cm)

A

Centerline

A. 8³⁄₈" (21.3 cm)

Install Range Hood

1.Lift the range hood up under cabinet and determine final location by centering beneath cabinet. Mark on the underside of cabinet the location of the 4 keyhole mounting slots on the range hood. Set range hood aside on a covered surface.

A

A. Keyhole slot

2.Use ¹⁄₈" (3 mm) drill bit and drill 4 pilot holes as shown.

A

A. Drill pilot hole

3.Install the 4 - 4.5 mm x 13 mm mounting screws in pilot holes. Leave about ¹⁄₄" (6.4 mm) space between screw heads and cabinet to slide range hood into place.

¹⁄₄"

(6.4 mm)

Non-vent (recirculating) installations - Do not remove any knockouts.

6

Image 6
Contents Hotte D’ASPIRATION DE Table of Contents Range Hood SafetyTable DES Matières Important Safety Instructions Installation Requirements Tools and PartsLocation Requirements Installation Clearances Venting RequirementsElectrical Requirements Installation Instructions Install Range HoodPrepare Location Power Supply Cable Installation Make Electrical ConnectionRange Hood USE Complete InstallationCleaning Range Hood CareWiring Diagram Replacing the Incandescent Light BulbU.S.A Assistance or ServiceAccessories CanadaWhirlpool Major Appliance Limited Warranty If YOU Need ServiceSécurité DE LA Hotte DE Cuisinière Votre sécurité et celle des autres est très importanteImportantes Instructions DE Sécurité Exigences Dinstallation Exigences demplacementOutils et pièces Exigences concernant l’évacuation Spécifications électriquesDistances de dégagement à respecter Instructions D’INSTALLATION Préparation de lemplacementInstallation de la hotte Installation du cordon dalimentation Raccordement électriqueUtilisation DE LA Hotte Achever l’installationCommandes de la hotte de cuisinière Entretien DE LA HotteRemplacement de lampoule à incandescence Schéma DE CâblageAssistance OU Service AccessoiresAu Canada Garantie Limitée DES MénagersPage Page W10400319D
Related manuals
Manual 24 pages 22.13 Kb

UXT4036AY, UXT4030AY specifications

The Whirlpool UXT4030AY and UXT4036AY range hood models represent a blend of style, function, and advanced technology, designed to enhance your kitchen's efficiency and air quality. With their sleek profiles, these range hoods add an elegant touch to any kitchen décor while effectively improving ventilation.

One of the standout features of both models is their powerful ventilation system. Equipped with a three-speed fan, the UXT4030AY and UXT4036AY enable users to select the optimal level of air circulation according to their cooking needs. The high-speed setting efficiently removes smoke, steam, and odors generated during cooking, ensuring a comfortable and pleasant kitchen environment.

The UXT4030AY and UXT4036AY come with a 400 CFM blower, which is effective for removing airborne grease and contaminants. This is crucial not only for the immediate cooking area but also for maintaining clearer air throughout the entire kitchen. Furthermore, this range hood includes an efficient grease filter that can be easily removed and cleaned, making it simple to maintain hygiene in your kitchen.

Both models are designed with quiet operation in mind. The noise levels are minimized, allowing for a more peaceful cooking experience without the distraction of loud fan noise. This is particularly beneficial for those who frequently entertain guests or enjoy cooking without interruptions.

Additional features of the UXT4030AY and UXT4036AY include built-in task lighting, which illuminates the cooking surface underneath. The lights are ideal for enhancing visibility while cooking, ensuring that meals are prepared safely and effectively. The user-friendly controls make it easy to switch between fan speeds and lighting settings, offering convenience at your fingertips.

The installation process for these range hoods is straightforward and flexible, accommodating various ducting and non-ducting configurations. This flexibility is essential for adapting the appliance to different kitchen layouts and ventilation needs.

In summary, the Whirlpool UXT4030AY and UXT4036AY represent an excellent choice for anyone seeking a blend of performance, style, and ease of use in kitchen ventilation. The combination of a powerful ventilation system, quiet operation, and convenient features make these range hoods a valuable addition to any modern kitchen. Whether you're simmering, sautéing, or frying, these models will help keep your kitchen fresh and welcoming.