Hamilton Beach 840126200 To Insert Attachments, Flat Beaters, Straight Wire Beaters and Whisk

3.To remove: Turn mixer off and unplug. Eject beaters or other attachments.

4.Grasp mixing shield in one hand, while holding mixer in other

hand. Pull shield straight out, then up, to remove.

5.Wash mixing shield in hot, soapy water. Rinse and dry.

Mixer Storage Case

Wipe clean with a damp, soapy cloth.

To Insert Attachments

Flat Beaters, Straight Wire Beaters and Whisk

1.Make sure mixer is unplugged and speed control is set to OFF.

2.Insert a beater or attachment into an opening on the

bottom of the mixer. Push until it clicks into place. Repeat with other beater or attachment.

Twisted Wire Beaters and Dough Hooks

1.Insert the wire beater or the dough

Collar	hook with the
	collar into the
	opening indi-
	cated by the
	illustration on
	the mixer.

2.Align tabs on the beater or dough

Tab	Slot	hook with the
		slots in the
		opening. Push
		until it clicks
		into place.
		Repeat with
		other beater or
		dough hook.

5