To Heat Water, How to Clean, Washer | Hamilton Beach 840107700

840107700 Ev02.qxd 12/5/02 2:38 PM Page 6

NOTE: We recommend using coffee that has been ground specifically for use in a percolator-typecoffee maker. Although, coffee marked “For All Coffee Makers” is accept- able. If using a coffee grinder and whole beans, percolator coffee should be a coarse grind. A finely ground coffee may cause the coffee basket to overflow.

To Heat Water

Use heated water to make instant coffee, hot cocoa, or tea.

1.To heat water, remove cover, basket and stem. Fill percolator with cold water to desired level as indicated by numbered servings on inside of percolator or water window.

2.Place basket on stem. Hold top of stem and place stem and basket into heating unit well.(Using the stem and bas- ket will speed heating time.) Place spreader on basket.

3.Place lid on percolator until it snaps closed. Plug in percolator and let go through complete perk cycle. Water is hot when Ready light glows.

How to Clean

1.After each use, unplug cord from outlet then remove cord from the percolator. Let cool before cleaning.

2.Remove lid, basket, spreader, and stem. Wash these in hot, soapy water. (These parts can also be placed in dishwasher.) Do not put percolator in dishwasher.

How to Clean (cont.)

3.Rinse all parts thoroughly and dry. Store with cover off.

	NOTE: Make sure the washer at bot- Stem
	tom of stem remains loose. If coffee
	grounds lodge in this area, remove
	them under running water or with a
	wooden pick then rinse and dry.	Washer
	4. Fill the percolator half-full with hot	Washer
	4. Fill the percolator half-full with hot
	water. Add a drop of liquid dishwash-
	water. Add a drop of liquid dishwash-

ing detergent and wash the inside of the percolator. Use a sponge and clean the inside of the heating unit well. This part must be properly cleaned to maintain the proper opera- tion of the percolator. Do not immerse percolator in water.

5.Drain the soapy water then fill the percolator with hot water to rinse. Pour soapy water through spout to clean the spout. Repeat with another hot water rinse. Dry.

6.Clean outside of percolator with a damp cloth. Do not use abrasive scouring pads or cleansers.

To Remove Mineral Deposits and Build-Up

If the percolator is used daily follow these instructions every other week. Fill the percolator with 6 cups cold water and

6 cups white vinegar. Assemble with stem, basket, spreader, and lid.

Plug in and let go through the perk cycle. When perking has stopped let sit another 15 minutes. Unplug and drain the percolator. Let cool then clean according to “How To Clean.”