INITIAL OPERATION
•When you use your appliance for the first time, pour fresh water into the water tank (without coffee) and switch on the appliance.
•Once all the water has passed through, switch the appliance off and let it cool down. When it is cold enough repeat the process with fresh water. Repeat this process 3 times.
PREPARATION OF COFFEE
•Open the lid of the water tank.
•Pour the desired amount of water into the water tank. Make sure not to overfill by respecting the maximum level indicated on the water tank.
•Swing the filter holder, insert a paper filter or permanent filter (depending on the model) and add the desired quantity of ground coffee. Replace the filter holder, making sure it is placed correctly.
•Never forget to close the lid of the water tank before switching on your coffee maker.
•Switch on the coffee maker. The pilot light of the switch will be illuminated, indicating that your appliance works. Thanks to the keep warm function, your coffee is warmed up as long as the appliance is switched on. Note that the appliance will be switched on as long as you do not switch it off manually. We advise you not to let the appliance switched on more than 2 hours and make sure that you never let an empty jug on the appliance.
•When you remove the jug from the appliance, a
•Wait until the brewing process is finished and the filter has run empty before removing the jug.
DECALCIFICATION AND CLEANING
•Decalcifying the coffee maker prolongs its life span. For decalcification only use products especially made for decalcification of coffee makers.
4USK CM 20903/CM25693 - 080429