Using your Sunbeam Pro Steam Iron (continued)
Using the shot of steam
The shot of steam can be used whether dry or steam ironing when the temperature dial is set to any temperature above the two dot (••) setting.
1.Ensure the tank is at least ¼ full of water.
2.Select the desired temperature and wait until the thermostat light goes out.
3.Press the shot of steam button several times with the iron on the soleplate to prime the pump.
NOTE: If the tank has run dry, it may be necessary to
Using the spray mist
The spray mist can be used whether dry or steam ironing to
1.Ensure the tank is at least ¼ full of water.
2.Press the spray button during ironing to release a fine mist from the spray nozzle.
The safety auto-off feature
(Model SR4300 only)
The safety
The iron will automatically shut off if left on the heel rest (vertical) for 15 minutes, or in the ironing position (horizontal) for 30 seconds, without being moved.
The thermostat light on the handle will flash and a warning beep will sound to let you know that you have left the iron unattended.
Power to the iron's heating element will be cut.
Once the iron is moved the power will reconnect. Allow the iron to heat until the thermostat light goes out, and continue ironing as normal.
15 minutes | 30 seconds |
7