Agency Listing Information

Series Warmers

This appliance is intended for use in commercial establishments only.

This appliance is intended to hold pre-heated food for human consumption. No other use is recommended or authorized by the manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.

Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.

Disconnect this appliance from electrical power before performing any maintenance or servicing.

This appliance is not jet stream approved. Do not direct water jet or steam jet at this appliance, or at any control panel or wiring. Do not splash or pour water on, in or over any controls, control panel or wiring.

Exposed surfaces of this appliance can be hot to the touch and may cause burns.

Do not operate this appliance if the control panel is damaged. Call your Authorized Wells Service Agent for service.

The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware.

WARNING:

SHOCK HAZARD

All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician.

DO NOT open any access panel which requires the use of tools. Failure to

follow this warning can result in severe electrical shock.

CAUTION:

RISK OF

DAMAGE

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance may result if these instructions are not followed.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns.

OpM LL-

004 p/n 305145

Refer to the product nameplate for the specific appliance for agency listings. In general:

This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions.

UL Listed warmers are U Listed under UL File E6070.

STD 4

E6070

UL Listed Warmers

VExcept Model 6411

LLCH-1220, SC-1, 6411, SC-7 specifications

Wells SC-7,6411, SC-1, LLCH-1220 represents a significant advancement in the realm of high-performance composite materials designed for various industrial applications. These models are particularly notable within sectors such as aerospace, automotive, and manufacturing due to their unique structural properties and versatility.

One of the standout features of the Wells SC series is its exceptional strength-to-weight ratio. This characteristic makes the SC-7,6411 and SC-1 models ideal for applications where minimizing weight without compromising strength is critical. This capability is essential in aerospace applications, where every ounce saved can lead to increased efficiency and performance.

Another highlight of the Wells SC models is their outstanding resistance to environmental factors. The materials are designed to withstand extreme temperatures, moisture, and chemical exposure. This durability ensures that components made from these composites maintain their integrity and performance in challenging conditions, making them suitable for use in harsh environments.

The LLCH-1220 variant introduces additional technological advancements, integrating advanced manufacturing processes such as additive manufacturing and automation. This modern manufacturing approach allows for intricate designs that were once impossible to achieve with traditional methods. The capability to produce highly complex geometries enhances the applications of these materials in fields requiring precision and innovation.

Moreover, the Wells models incorporate advanced nanotechnology to improve their properties further. This includes increased resistance to wear and fatigue, which significantly extends the lifespan of components made from these materials. The integration of nanomaterials also boosts thermal conductivity, making the LLCH-1220 particularly suitable for electronics and thermal management systems.

Another critical characteristic of the Wells SC series is their ease of fabrication. These composites can be molded into various shapes and forms, allowing designers and engineers to harness their strengths effectively. Enhanced workability reduces lead times in production and facilitates rapid prototyping for new applications.

In summary, Wells SC-7,6411, SC-1, LLCH-1220 stands out in the composite material landscape due to their strength, environmental resistance, advanced manufacturing capabilities, and enhanced lifetime performance. These features make them a preferred choice for industries looking to optimize performance while maintaining efficiency. As technology continues to evolve, these models are poised to play a crucial role in the future of material science and engineering.