Wells SW-10 operation manual Infinite Switch, Adjustable Legs

Page 4

MOUNT INTO

THREADED

HOLES IN WARMER

FRAME

TURN BOTTOM PORTION TO

ADJUST

A.INFINITE SWITCH

1.On INFINITE SWITCH CONTROLLED warmers, power is applied to the heating element based on the control knob position and the amount of energy consumed.

2.The desired temperature is controlled by rotating the TEMPERATURE CONTROL KNOB. The knob may have a numeric scale, where higher numbers correspond to higher temperature. LO is the lowest temperature setting; PREHEAT is a “continuous on” setting. Infinite switch controlled warmers are equipped with a hi-limit device to prevent overheating. The hi-limit will self-reset after the warmer has cooled.

3.On warmers equipped with an INDICATOR LIGHT, the light will glow when the infinite switch is in any position other than OFF.

4.The TEMPERATURE CONTROL KNOB will rotate without stopping, with PREHEAT and OFF having obvious detents. The OFF position is a “positive” OFF (i.e. the switch is positively held in the open position).

NOTE: Since the infinite switch is basically a timing device, no temperature sensing component is required.

B.ADJUSTABLE LEGS

1.Countertop warmers may be equipped with adjustable legs. These legs allow for:

a.leveling the warmer

b.ventilation around the warmer, and

c.cleaning under the warmer.

2.Adjustable legs are supplied with the warmer, these legs MUST be properly installed before the warmer is placed into operation. See page 11 for alternate legs.

002 p/n 303306 OpM CT Warmer_Inf. Sw.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Wells Countertop Warmers 002 p/n 303306 OpM CT WarmerInf. Sw Voltage Watts Amps Phase Power Cord IntroductionInfinite Switch Adjustable LegsRisk Damage Shock HazardHOT Surface Risk of Injury Fire HazardUnpacking & Inspection SET-UP NotesPRE-HEATING the Warmer WET or DRY OperationOperation Daily Cleaning Instructions Burn HazardWeekly Cleaning Instructions Chemical Burn HazardSymptom Possible Cause Suggested Remedy Care of Stainless Steel Description Adapters & Insets Important Use only factory authorized service parts Genuin e Parts

SW-10 specifications

The Wells SW-10 is a versatile and robust steam generator that has gained recognition in various industries due to its innovative features and advanced technologies. Designed for efficiency and reliability, the SW-10 stands out with its exceptional performance capabilities, making it a preferred choice for operators in need of consistent steam supply for heating, sterilization, cleaning, and other applications.

One of the key features of the Wells SW-10 is its impressive steam output. The unit is engineered to deliver stable and high-quality steam on demand, ensuring that processes requiring steam heat can be carried out without interruption. The steam generator has a compact design, making it suitable for installations in environments where space is limited, while still providing ample steam production capacity.

Equipped with cutting-edge control technologies, the Wells SW-10 offers intuitive operation and monitoring capabilities. Its user-friendly interface allows operators to easily set parameters for pressure and temperature, facilitating precise control over the steam generation process. This capability is essential in applications where specific steam characteristics are crucial for optimal results.

The SW-10 also features robust safety mechanisms that protect the unit and its users. This includes pressure relief valves, water level sensors, and thermal cutoffs, ensuring that the generator operates within safe parameters. These safety features not only enhance the reliability of the system but also contribute to reduced maintenance needs over time.

Another characteristic of the Wells SW-10 is its energy efficiency. The generator is designed to minimize energy consumption while maximizing steam output, making it an environmentally friendly option for businesses looking to reduce their carbon footprint. The incorporation of advanced insulation materials further enhances thermal efficiency by reducing heat loss.

Durability is yet another hallmark of the Wells SW-10, built from high-quality materials that withstand the rigors of continuous operation. This ensures a long lifespan, reducing the frequency and cost of replacements and repairs, an essential factor for companies aiming to maintain operational stability.

In summary, the Wells SW-10 steam generator is a highly efficient, compact, and reliable solution for industrial and commercial applications. Its combination of high steam output, advanced control technologies, robust safety features, energy efficiency, and durability makes it an essential tool for various industries that rely on steam for their operations.
Top Page Image Contents