DeLonghi KF8150M manual Using for the first time, Using the Blender

Thank you for choosing this De’Longhi Blender.To get the best results from your new blender it is advisable to read these instruc- tions carefully before using the appliance.This is the only way to ensure optimum results and maximum safety.

Using for the first time

•Before using the appliance for the first time, wash all acces- sories thoroughly.Take care when handling the blades as they

are sharp.Wipe the motor base with a damp cloth Fig.1

•Never immerse the motor base in water!

•Check that the mains supply voltage corresponds to the voltage indicated on the rating plate.

Using the Blender

•Place the appliance on a dry flat surface.

DO NOT PLUG THE APPLIANCE INTO THE MAINS UNTIL ALL ACCESSORIES HAVE BEEN CORRECTLY FITTED.

•Place the blender jar on the motor base.

•Pour the ingredients into the jar. This may be done by:

1.Removing the entire lid by rotating anticlockwise;

2.using the lid without the measuring cup;

3.using the fruit tray inserted upside down in the hole in the lid (fig. 1).

•The appliance is supplied with a handy measuring cup with a useful hole for adding, for example, drops of flavouring or essence without opening the lid (fig. 2). If you turn the measur- ing cup upside down and close the hole, it can also be used as a

measure for oil or similar. (see fig. 3).

Important:

Never use the appliance for more than 3 minutes consecutively. Pause for 3 minutes and continue to use for a maximum of five cycles. The appliance must then be left to cool down.

•Cut solid food into cubes and add water.

•Place the lid on the jar and rotate clockwise until the safety device on the handle of the jar clicks into place.The blender will not function if the lid is not correctly positioned on the jar.

•Plug into the mains.

•To start processing the ingredients, just turn the ON/OFF knob to the desired speed (1/2/3).When the ingredients have reached the required consistency, turn the knob back to the (0 ) position.

•On the "P" position, the blender operates at maximum speed, improving control for short periods of processing.

•Before cleaning, always unplug from the mains.

Fig.2

Fig.3

3

Blender KF8150