DeLonghi DEDW45S manual Installation Using Your Dishwasher

Page 8

Installation

Using Your Dishwasher

ColdWater Connection

ŸConnect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place.

ŸIf the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is needed to avoid the risk of the water inlet getting blocked and damaging the appliance.

WARNING!

In order to avoid water staying in the inlet hose, please close the hydrant after using. (Not applicable to appliances without aqua-stop.)

Drain Hose Connection

ŸInsert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance . The top of the hose must be at a height between 40 and 100cm. The free end of the hose must not be immersed in water to avoid the back flow of it.

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be positioned either to the right or the left sides to facilitate proper installation.

Levelling

ŸOnce the appliance is positioned for levelling, the height of the dishwasher may be altered via adjustment of the screwing level of the feet. In any case, the appliance should not be inclined more than 2 °.

Water Outlet

ŸConnect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure that the water drain hose is not kinked or squashed.

Extension Hose

ŸIf you need a drain hose extension, make sure to use a similar drain hose.

ŸIt must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.

Syphon Connection

ŸThe waste connection must be at a height of between 40 cm (minimum) and 100 cm (maximum) from the bottom of the dish. The water drain hose should be fixed by a hose clip. The free end of the hose must not be immersed in water.

NOTE:

If you open the door during a wash cycle, the machine will pause. The LED Display Window will stop blinking and the buzzer will sound every minute unless you close the door. After you close the door, the dishwasher will continue working after 10 seconds.

If display window shows error codes after a warning sound (see page 21 for "ERROR CODES”), that indicates the machine is out of order, please turn off the main power and water supply before calling for service.

FORGETTO ADD A DISH?

A forgotten dish can be added at any time before the detergent cup opens.

1.Open the door a little to stop the washing.

2.After the spray arms stop working, you can open the door completely.

3.Load the forgotten dishes.

4.Close the door, the dishwasher will start running again after 10 seconds.

WARNING! It is dangerous to open the door when washing, because the hot water may scald you.

ATTHE END OFTHEWASH CYCLE

When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher. Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better.

Switch off the Dishwasher

When the program light isn't blinking and is solidly lit, the program has ended.

1.Switch off the dishwasher by pressing the ON/OFF button.

2.Turn off the water tap!

Open the door carefully

The dishes should be allowed to cool down around 15 minutes before removing from the appliance.

Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. Dishes will be cooler and the drying will be improved.

Unloading the Dishwasher

It is normal that the dishwasher is wet inside.

Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto the dishes in the lower one.

DISHWASHER

Inlet pipe

Drain pipe

connector

connector

SINK

POWER

Min 400mm

 

OUTLET

 

Max 1000mm

WARNING!

DO NOT BEND IN ANY WAY!

FRONT VIEW

Min 100mm

Page 8

Page 17

Image 8
Contents De’Longhi Dishwasher Contents Warranty InformationHelp us Help You Parts and FeaturesBefore you call for service De’Longhi’s Safety Precautions Troubleshooting Error CodesDishwasher Safety Precautions Safety Alert SymbolDishwasher Safety Precautions Care and Cleaning Care and Cleaning Installation Safety Precautions Installation Using Your Dishwasher Priorto Using Forthe Firsttime Control Panel Before Startingthe DishwasherFill the Rinse Aid Dispenser Turning Onthe ApplianceAdjust lever Rinse Starting Awashing ProgramNot Suitable for USE Damage to glassware and other dishesSauces Loadingthe Dishwasher Basket

DEDW45S specifications

The DeLonghi DEDW45S is a versatile and powerful electric dehumidifier designed to enhance comfort in indoor spaces by effectively reducing humidity levels. This unit is particularly suitable for medium to large areas, such as basements, living rooms, and garages, making it a perfect choice for homeowners looking to improve air quality and prevent mold growth.

One of the standout features of the DEDW45S is its impressive water extraction capacity. Capable of removing up to 45 pints of moisture from the air per day, this dehumidifier ensures a significant reduction in humidity, thus safeguarding your home from dampness and mildew. Equipped with a large 2-gallon water tank, the unit allows for extended operation without the need for frequent emptying. For those who prefer a more automated solution, the DEDW45S offers a continuous drainage option via a standard garden hose, providing a hassle-free experience.

The DEDW45S is designed with user convenience in mind. It features an intuitive control panel that allows users to easily adjust humidity settings and operating modes. The built-in humidity sensor automatically activates the dehumidifier when levels exceed the desired threshold, ensuring optimal moisture control. Additionally, the unit operates quietly, making it ideal for nighttime use without causing disturbances.

This dehumidifier also incorporates advanced technologies aimed at improving efficiency and effectiveness. The integrated air filtration system captures dust and allergens, contributing to a healthier living environment. The unit utilizes a refrigerant coil system that absorbs moisture and releases dry air, helping to lower overall energy consumption. Furthermore, the DEDW45S is designed with a compact and sleek aesthetic, allowing it to blend seamlessly into any room decor.

With safety features such as an auto shut-off function when the water tank is full, the DEDW45S protects against overflow and potential damage. Its lightweight design and convenient carrying handle make it easy to move from one room to another.

In summary, the DeLonghi DEDW45S represents an excellent solution for managing humidity. Its robust moisture removal capability, user-friendly controls, and energy-efficient operation make it a reliable choice for anyone looking to create a more comfortable and healthier indoor environment. Whether dealing with dampness in basements or simply maintaining air quality in living spaces, this dehumidifier is poised to deliver outstanding performance and peace of mind.