DeLonghi N/A manual Using for the first time, Installation

Page 3

ICM07 30-12-2002 14:42 Pagina 3

Thank you for choosing this De’Longhi coffee maker.To get the best results from your new coffee maker it is advisable to read these instructions carefully before using the appliance. This is the only way to ensure optimum results and maximum safety.

Using for the first time

Carefully unpack the coffee maker and remove all the packaging material. Before using wash the mug and surfaces. Do not immerse the coffee maker in water; simply wipe with a cloth and mild detergent if necessary. Do not put in the dishwasher or use harsh, abrasive cleaners.

For the best tasting results prior to making coffee we recommend that you flush the coffee maker out with cold water only, without using coffee to remove any dust which may still be inside the cof- fee maker. To do this follow the directions ‘Preparing the coffee’.

Installation

Place the coffee maker on a flat work surface at a safe distance from taps and sinks.

Check that the voltage corresponds to that indicated on the appliance rating plate.The appliance must always be connected to a well-earthed socket rated at 10A minimum.The manufac- turer is not liable for damage caused by inadequate earthing of the appliance.

In the event of incompatibility between the plug on the appli- ance and the socket, have the plug replaced by a qualified serv- ice engineer.

If the cable is damaged or requires replacing, contact a service centre authorised by the manufacturer only.

Never install the machine in an environment that can reach a temperature less than or equal to 0°C (the appliance may be damaged if the water freezes).

N.B.:This coffee maker has an on button instead of a switch.

3

Coffee Maker

Image 3
Contents Automatic Filter Coffee Maker Water reservoir Installation Using for the first timeCleaning and maintenance Preparing the coffeeDescaling Power cord Safety WarningsElectrical requirements 139IDL/09.02