OPERATING YOUR COFFEE MAKER
10.Swing the filter door closed until it snaps into place. WARNING: Do not operate your coffee maker if the door does not close completely. If the door does not close completely, check to see that the filter basket is properly positioned inside the filter holder.
11.DC87T Series: Make sure the carafe lid is down.
DC89TTC Series (Figure 4): Secure the lid on the carafe until it locks into place. Indicators on top of the lid show how to turn the lid for locked and open positions. Place the carafe on the
12.Plug the unit into an outlet and press the “TIMER ON/OFF” button once. The “ON/TIMER” indicator light will illuminate “GREEN”. To begin the brewing
process, press the “TIMER ON/OFF button once again and the “ON/TIMER” indicator light will illuminate “RED”.
13.In a few minutes the coffee maker will complete the brewing cycle. NOTE: To terminate the brewing process at any time, press the “TIMER ON/OFF button once and the “ON/TIMER” indicator will no longer be illuminated.
14.NOTE: If you would like a cup of coffee before the full pot is brewed, the Pause ‘N Serve feature allows you to interrupt the brewing process. The brewing process does not stop during this period; only the flow of coffee from the basket. Do not remove the carafe for longer than 30 seconds or the coffee may overflow from the basket stops. While we offer this feature, we do not recommend you pour the coffee before the cycle has reached comple- tion, since the coffee brewed at the beginning of the cycle has a flavor which is very different from the flavor at the end of the cycle. Removing a cup during the brewing cycle will alter the flavor of the finished pot.