DeLonghi EAM3400 manual Start Time, Correct Incorrect, Changing and Setting the Menu Parameters

Check that the two red buttons have snapped out, otherwise the door cannot be closed.

The two red buttons have snapped out

CORRECTLY

The two red buttons have not snapped out

CORRECT INCORRECT

NOTE 1: If the infuser is not inserted correctly until it clicks into place and the two red buttons have not snap- ped out, the service door cannot be closed.

NOTE 2: If it is hard to insert the infuser, before inserting it squeeze it to the right size by pressing it force- fully from the top and bottom simultaneously, as shown in figure 28.

NOTE 3: If it is still hard to insert the infuser, leave it out of the appliance, close the service door, unplug from the outlet then plug in again.

Wait for all the lights to go off, then open the door and replace the infuser.

•replace the drip tray, complete with the grounds container;

•close the service door.

12 CHANGING AND SETTING THE MENU PARAMETERS

The following menu parameters and functions can be changed by the user:

•Clock

•Auto-start time

•Descaling process

•Coffee temperature

•Length of time the appliance remains on

•Water hardness

•Factory default values

12.1 Setting the clock

To set the clock, proceed as follows:

•Press the button (the light over the button comes on) then press the button repeatedly until the appliance displays

CLOCK 00:00

•Press the button to set the clock. (If you hold the , button down, the time is changed rapidly).

• Press the button to confirm the value;

•Press the button to exit programming mode or to change other parameters. 12.2 Setting auto-start time

This programs the time the appliance will come on automatically.

•Make sure the clock on the appliance is set as described above.

• Press the button then press the button repeatedly until the appliance displays:

START TIME 00:00

16