DeLonghi EAM3500 manual Milk Frothing, Milk for Cappuccino Program Quantity

NOTE 4: To change the quantity of coffee or milk delivered automatically into the cup, follow the instructions in section 14.

13 PREPARING FROTHED MILK (WITHOUT COFFEE)

•Remove the lid of the milk container.

•Fill the container with the quantity of milk you want to prepare (fig.19).

•If you want to prepare hot frothed milk, put the lid with the wording "FROTHED MILK – CAPPUCCINO”on the milk container. If, on the other hand, you want to prepare hot milk (without froth), put the lid with the wording "STEAMED MILK – LATTE” on the milk container.

•Attach the milk container to the appliance (fig. 22).

•Place a sufficiently large cup under the milk spout (fig. 23).

•Press the button twice (within 2 seconds). The appliance displays:

MILK FROTHING

and after a few seconds, the frothed milk is delivered from the milk spout into the cup below.

•After delivery, clean the channels inside the milk container by pressing the button as described in the previous section (note 3).

14 CHANGING THE QUANTITY OF COFFEE AND MILK FOR CAPPUCCINOS

The appliance is factory preset to automatically deliver a standard cappuccino. To change these quantities, proceed as follows:

•Fill the container with milk up to the maximum level indicated on the container.

•Press the button for at least 8 seconds until the appliance displays:

MILK FOR CAPPUCCINO PROGRAM QUANTITY

Now release the button. The appliance starts to run off milk.

•Once the required quantity of milk has been run off, press the button again. Milk delivery stops and the quantity is memorized. You should not run frothed milk for more than 3 minutes at a time.

•After a few seconds, the appliance delivers coffee into the cup and displays:

COFFEE FOR CAPPUCCINO PROGRAM QUANTITY

•Once the required quantity of coffee has been delivered, press the button again. Coffee delivery stops and the quantity is memorized.

The appliance is now re-programmed with the new settings and displays: READY.

15 CLEANING AND MAINTENANCE

Before performing any cleaning operations, the appliance must have cooled down and must be disconnec- ted from the outlet power supply.

Never immerse the appliance in the water: it is an electrical appliance.

Do not use solvents or abrasive cleaning products to clean the appliance. A soft damp cloth will suffice. The infuser, grounds container, water tank and drip tray must NEVER be washed in the dishwasher.

15.1 Cleaning the coffee maker

Clean the grounds container (as described in section 6, note 7) whenever it requires emptying. The water tank should also be cleaned regularly.

The drip tray is fitted with a level indicator (red) showing the level of water it contains.

When the indicator starts to become visible (a few millimeters under the drip tray), the drip tray must be emp- tied and cleaned.

Check that the holes in the coffee spout are not blocked.

To unblock them, scrape the dry coffee residues away with a needle (fig. 27).

15