Decalcification, Other Cleaning Operations

that the hole marked by the B arrow is not plugged.

•Once clean, all the parts must be re-assembled in the correct manner. In particular, make sure that the rubber mixer is inserted all the way in and that the red coloured foamer is inserted until a click is heard.

If this cleaning is not carried out after every use, the milk foamer may not work properly, the milk may not be aspirated or the milk may drip from the milk tank tube.

CLEANING THE FILTER HOLDER FOR PODS

Every so often, the filter holder for pods should be cleaned, as follows:

•press the filter holder button and remove the filter, as indicated in fig. 25.

•check that the pinholes of the filter are not plugged. If necessary, clean it carefully with hot water, scrubbing it with an abrasive pad.

•clean the inside of the filter holder and the rubber gasket;

•replace the filter.

Never wash the filter holder in the dishwasher.

CLEANING THE ESPRESSO BOILER OUTLET

At least once a year, it is necessary to clean the outlet of the espresso boiler in the following manner:

•check that the coffee machine is not warm and the plug is detached from the mains;

•using a screwdriver, unscrew the screw that holds the outlet of the espresso boiler (fig. 23);

•using a moist cloth, clean the area of the boiler where the outlet was positioned;

•brush the outlet with a little dish washing liquid until all the pinholes are clean;

•rinse the outlet under the tap, still scrubbing it;

•replace the outlet of the espresso boiler.

OTHER CLEANING OPERATIONS

1.Do not use solvents or detergents in cleaning the coffee maker. It is enough to use a soft, moist cloth.

2.Extract the drip-trays, empty them and wash them periodically.

3.Clean the water tank for espresso coffee.

4.Never immerse the coffee maker in water, not even when cleaning it. It is an electrical appliance.

DECALCIFICATION

It is advisable to clean the calcium from the machine every 200 cups of coffee. It is recommended that specific (store-bought) products for decalcification of espresso coffee machines be used. If such products are not available, it is possible to proceed as follows:

1.Fill the tank with water using 1 liter of water;

2.Dissolve 2 spoonfuls (about 30 grams) of citric acid in the water (citric acid may be found in a pharmacy);

3.Press the ESPRESSO switch and wait until the ‘OK’ pilot light comes on;

4.Check that the filter holder is not attached and place a container under the outlet of the machine;

5.Press the coffee delivery switch and allow half the water in the tank to flow out. Then stop the flow by pressing the switch again;

6.Allow the solution to act for about 15 minutes, then start up the flow again until the tank is completely empty;

7.To eliminate the remains of the solution and of the calcium, rinse the tank well, fill it with clean water and replace it in its seat. Press the coffee delivery switch;

8.Wait until the tank is empty;

9.Press the switch again and repeat operations 7 and

8 one more time.

Repairs for malfunctioning caused by problems of calcium build-up are not covered by the guarantee if the decalcification described above is not carried out regularly.

BAR50 specifications

The DeLonghi BAR50 is a remarkable entry-level espresso machine that combines performance with user-friendly features, making it an ideal choice for coffee lovers at home. This machine stands out for its compact design, which allows it to fit comfortably in any kitchen without taking up too much counter space.

One of the main features of the BAR50 is its 15-bar pressure pump, which is essential for brewing rich, flavorful espresso. The high pressure extracts the perfect amount of oils from the coffee grounds, resulting in a balanced shot topped with a velvety crema. This is crucial for espresso aficionados who desire authenticity in their brewing.

The BAR50 is equipped with a convenient swivel jet frother. This technology enables users to create creamy froth for lattes and cappuccinos with ease, offering a professional coffee shop experience at home. The frother is designed for versatility, allowing for both steaming and frothing of milk, accommodating various preferences for milk-based beverages.

Another notable characteristic of the DeLonghi BAR50 is its easy-to-use control panel. With straightforward knobs and buttons, even beginners can quickly understand how to adjust settings for their ideal brew. It also features a removable water reservoir, simplifying the process of filling and cleaning. Maintaining the machine is a breeze, ensuring that it remains in optimal condition for daily use.

In addition to its practical design, the BAR50 includes a built-in cup warmer, which is a thoughtful touch for those who appreciate a hot cup of espresso right from the start. Heating the cups before brewing helps maintain the temperature of the espresso, enhancing the overall drinking experience.

Sustainability is another aspect to admire about the DeLonghi BAR50. The machine is designed to be energy-efficient, reducing electricity consumption while delivering high-performance results. This reflects a growing trend in appliance design, where consumer preferences lean towards eco-friendly options.

Furthermore, the BAR50 allows for the use of both ground coffee and espresso pods, granting users the flexibility to choose their preferred method of brewing. This dual compatibility caters to varying lifestyles and preferences, ensuring that everyone can enjoy their perfect cup of coffee.

In conclusion, the DeLonghi BAR50 is an exceptional espresso machine that combines convenience, quality, and efficiency. With features such as the 15-bar pressure pump, swivel jet frother, and easy-to-use controls, it is well-suited for both novice baristas and seasoned coffee enthusiasts alike.