DeLonghi EMFPS 60 B manual Replacing the Oven Lamp, Left Lamp

REPLACING THE OVEN LAMP

WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

■Let the oven cavity and the heating elements to cool down;

■Switch off the electrical supply;

LEFT LAMP:

■Remove the left sliding shelf and the side catalytic panel by unscrewing the fixing screws (see chapter REMOVING AND REASSEMBLING THE SLIDING SHELVES AND THE CATALYTIC PANELS at page 37).

■Press down from the top the protective cover A (fig. 6.4) and remove it by rotating on the lower side. IMPORTANT: never use screwdrivers or other utensils to remove the cover A. This could damage the enamel of the oven or the lampholder. Operate only by hands.

■Unscrew and replace the bulb B with a new one suitable for high tempera- tures (300°C) having the following specifications: 230-240V 50 Hz, 25W, E14.

■Refit the protective cover A operating in reverse order. ATTENTION: the notch in the inner edge of the cover must be oriented toward the lamp.

■Assemble the side catalytic panel and the left sliding shelf.

TOP RIGHT LAMP:

■Remove the protective cover C (fig. 6.4);

■Unscrew and replace the bulb B with a new one suitable for high tempera- tures (300°C) having the following specifications: 230-240V 50 Hz, 25W, E14

■Refit the protective cover;

NOTE: Oven bulb replacement is not covered by your guarantee.

1

A

2 B A B C

A

Fig. 6.4

39