Melissa 746-086 manual Prior to First USE, Cleaning, Information on Disposal of this Product

PRIOR TO FIRST USE

Each individual appliance is checked at the factory, but for safety’s sake, please check carefully after unpacking for damage during transport. Check for visible damage (e.g. cracks or scratches). If the appliance appears to have been damaged, contact the shop where you bought it, and do not use it until it has been checked by an authorised specialist.

Clean all parts that come in direct contact with food before using the appliance for the first time.

Fitting the blender shaft

Fit the blender shaft to the motor unit by inserting the spindle into the middle of the shaft, and into the socket on the motor unit. Carefully turn the shaft anticlockwise until the arrow on the outside is aligned with the closed padlock symbol (4) on the motor unit and you hear a slight click. To remove the shaft, turn it carefully clockwise until the arrow is aligned with the open padlock symbol (4) on the motor unit.

Blending in the jug

Attach the blender shaft to the motor unit as described under Fitting the blender shaft. Place the food items to be blended into the jug (7). Hold the jug firmly with one hand. Place the blender shaft into the jug until it touches the food items and switch on by pressing one of the speed selection switches (2) and holding it down. The blender will run as long as you hold the button down.

NB: We recommend the blender does not run for more than 1 minute at a time when blending or chopping. Allow the appliance to cool for a little while before continuing.

Tips

•Wash fruit and vegetables thoroughly before blending them.

•Peel fruits such as oranges, lemons, mandarins, mango, kiwi, melon and pineapple before blending.

•Remove any pips, stones etc from fruit before blending.

•Slice fruit and vegetables into small pieces before putting them into the jug.

•Start at low speed (I) to avoid splashes in the open jug. Switch to high speed (II) if and when required.

CLEANING

•Remove the plug from the socket before cleaning.

•Allow the blender to cool before dismantling and/or cleaning.

•Do not use scouring powder, steel wool or other aggressive cleaning materials, as they can scratch the surface of the appliance.

•Use a damp cloth (warm water) and a little detergent if necessary. Wipe off with a dry cloth.

•Wash removable parts in warm water with a little detergent added. Rinse all parts thoroughly and dry before replacing them.

•Take great care when cleaning and handling the blades as they are very sharp.

•Do not immerse the motor unit in water. Do not allow water to seep into it.

INFORMATION ON DISPOSAL OF THIS PRODUCT

Please note that this Adexi product is marked with this symbol:

This means that this product must not be disposed of together with ordinary household waste, as electrical and electronic waste must be disposed of separately.

In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the EU can take used equipment to special recycling stations free of charge. In some member states you can, in certain cases, return the used equipment to the retailer from whom you purchased it, if you are purchasing new equipment. Contact your retailer, distributor or the municipal authorities for further information on what you should do with electrical and electronic waste.

15