Melissa 643-198 Use, Tips for Preparation of Food, Before lowering the basket, After cooking

Page 15

Clean the lid (11), bowl (5), basket (9) and casing

(6) using warm water and a little washing-up liquid, and dry the parts carefully. The parts can also be washed in a dishwasher.

Fit the heating element and the control panel (4 and

1) in the bowl by inserting the pins on the inside of the plastic unit down into the grooves on the rear of the bowl.

NOTE; Heating element must be pushed all the way down, to activate safety switch. Otherwise unit may not be able to heat

Fit the handle (10) onto the basket by clipping together the handle’s two metal braces, inserting them into the brackets on the inside of the basket and tilting them in against the metal plate. Then loosen the knob on the metal braces, so they are firmly fixed in the bracket, and the black plastic knob on the handle is at right angles to the basket.

Check that the handle is fitted correctly before you use the basket.

USE

Check that the deep fat fryer is switched off.

Pour the required amount of oil into the bowl. Fill the oil to somewhere between the minimum and maximum level marks on the inside of the bowl. We recommend using liquid oil, which is recommended

for deep fat frying.

Tip: You can use lard or other solid fat if you wish, but you will need to melt it first in the bowl. Set the temperature control to the lowest temperature and add the fat in small pieces. Only turn the temperature up to the desired level once the fat has melted.

Place the lid on the bowl.

Plug the fryer in, and set it to the desired temperature by turning the temperature control (3). The red temperature indicator lights up and remains on while the deep fat fryer is heating up. Once the deep fat fryer has reached the selected temperature, the temperature indicator (2) goes out. The temperature indicator comes on and goes off during use, which merely indicates that it is maintaining the selected temperature.

Do not add the food until the required temperature is reached.

Remove the lid from the deep fat fryer.

Place the food in the basket and lower it carefully into the bowl. Make sure the oil level does not rise to the edge of the bowl.

Put the lid on the deep fat fryer by pressing the two plastic grooves on the lid over the metal braces on the handle and tilting the lid downwards towards the edge of the basket. Always hold the basket handle firmly when fitting or removing the lid.

NOTE: Heating element must be pushed all the way down to activate safety switch. Otherwise unit may not be able to heat.

Important!

Be careful, as the oil may spit. Take care when removing the lid, as hot steam may be released.

The non-auto resetting thermostat, built-in the product

If the deep fryer has been in use for a prolonged time, the built-in non-auto resetting thermostat will activate and cut off the current to protect the appliance from overheating.

Reset the thermostat by pushing the indicated button, after the heating element has cooled down, to enable the deep fryer to function normally again.

TIPS FOR PREPARATION OF FOOD

Before lowering the basket

Always make sure that the food is dry before lowering it into the hot oil.

Ensure that the food is roughly the same size so that it cooks evenly. Avoid very thick pieces.

Some types of food should be breaded before being cooked in the deep fat fryer.

Make sure you remove as much ice as possible from frozen food. However, it does not need to be defrosted before cooking.

Do not fill the basket above the max mark on the metal plate under the handle.

Important!

The handle may be very hot after any prolonged period of use.

Cooking tips

Below is a guide to cooking temperatures and times for various foods:

 

Temperature

Time

Breaded fish fillets

170° C

5-6 min.

Large prawns

170° C

3-5 min.

Chicken breasts

175° C

3-4 min.

Breaded chicken fillets 170° C

12-15 min.

Onion rings

180° C

3 min.

Battered broccoli

185° C

2-3 min.

French fries

 

 

(1st stage)

160° C

8-10 min.

French fries

 

 

(2nd stage)

190° C

3-4 min.

After cooking

1.Lift the basket up out of the bowl and tilt it so that it rests on the edge of the bowl.

2.Allow the oil to drip from the food before removing the basket.

15

Image 15
Contents 643-198 Introduktion SikkerhedsforanstaltningerOversigt Tips TIL Tilberedning AF MAD FØR Første AnvendelseBrug Apparatets indbyggede termostat uden automatisk nulstillingOplysninger OM Bortskaffelse OG Genbrug AF Dette Produkt Håndtering OG Opbevaring AF OlienRengøring OpbevaringSladd, stickkontakt och eluttag SäkerhetsåtgärderNormal användning av fritösen Placering av fritösenInnan du sänker ner korgen Innan Första AnvändningAnvändning Tips FÖR MatlagningGarantivillkor Hantera OCH Förvara OljanRengöring Information OM Kassering OCH Återvinning AV Denna ApparatFØR Frityrkokeren TAS I Bruk Første Gang IntroduksjonSikkerhetsregler Oversikt Over Frityrkokerens DelerEtter tilbereding BrukTips OM Tilberedning AV MAT Før du senker ned kurvenInformasjon OM Avhending OG Resirkulering AV Produktet Håndtering OG Oppbevaring AV OljenRengjøring OppbevaringEnnen Ensimmäistä Käyttökertaa JohdantoTurvallisuustoimet Merkkien SelityksetRuoanvalmistuksen jälkeen KäyttöVinkkejä Ruoanvalmistukseen Ennen korin laskemista säiliöönTietoja Tuotteen Hävittämisestä JA Kierrätyksestä Öljyn Käsittely JA SäilytysPuhdistus SäilytysPrior to First USE Safety MeasuresIntroduction KEYAfter cooking USETips for Preparation of Food Before lowering the basketStorage CleaningGuarantee Terms Handling and Storing the OILSicherheitshinweise EinleitungProduktbeschreibung VOR DEM Erstmaligen GebrauchAnwendung Handhabung UND Aufbewahrung DES ÖLS ReinigungAufbewahrung Importeur GarantiebedingungenWprowadzenie Główne Elementy Przed Pierwszym UżyciemUżytkowanie Temperatura Czas Importer Warunki GwarancjiМеры Предосторожности Обычное использование фритюрницы Размещение фритюрницыШнур, штепсельная вилка и электрическая розетка Описание Перед Первым ИспользованиемИспользование Информация ПО Утилизации И Переработке Изделия Извлечение И Хранение МаслаОчистка Хранение

643-198 specifications

Melissa 643-198 is a groundbreaking innovation in the field of advanced robotics, designed to enhance automation and efficiency across various industries. This sophisticated robotic system boasts several main features that set it apart from its predecessors. One of the leading attributes of Melissa 643-198 is its exceptional adaptability. It can seamlessly integrate into a wide range of environments, from manufacturing plants to healthcare facilities, making it a versatile solution for numerous applications.

The technology behind Melissa 643-198 is truly cutting-edge. It employs state-of-the-art artificial intelligence Algorithms that allow it to learn from its surroundings and improve its performance over time. This self-learning capability ensures that Melissa can adjust to new tasks and challenges without requiring extensive reprogramming. Additionally, it is equipped with advanced sensor technologies that grant it the ability to navigate complex environments, detect obstacles, and avoid collisions in real-time.

Another significant characteristic of Melissa 643-198 is its user-friendly interface. The system is designed with operators in mind, featuring intuitive controls and easy-to-understand feedback mechanisms. This simplicity means that personnel can quickly get up to speed with manipulating the robotic system, minimizing training time and enhancing overall productivity.

Melissa 643-198 also prioritizes safety, boasting a series of integrated safety features. These include emergency stop options, collision detection, and automatic shut-off capabilities, ensuring that it can operate safely alongside human workers. The design adheres to the highest safety standards, which is crucial for environments where humans and machines collaborate closely.

In terms of versatility, Melissa 643-198 can be customized for specific tasks, whether that involves assembly line work, patient care, or even logistical support. This customization is facilitated by its modular design, allowing users to equip it with various tools and attachments, enhancing its utility across different functions.

With its combination of advanced technology, adaptability, user-centric design, and safety features, Melissa 643-198 is at the forefront of the robotics revolution, pushing the boundaries of what automated systems can achieve in the modern workplace. Its presence is expected to transform workflows, enhance efficiency, and ultimately pave the way for a new era of robotics across various sectors.