Cobra Electronics CIR 1000 A, CIR 1000 E manual Connecting to wireless network, Choose Wlan Setting

Page 11

Connecting to wireless network

Step 1 – Choose Wlan Setting

Note: a. Unless you set your internet to LAN connection, it will automatically choose WLAN connection, and then skip to step 2 below.

b.If you have set it to LAN, you may need to do a small operation as follows:

1.Refer to page 6 “choose LAN setting”, rotate the Scroll knob to <Wireless>, and press to confirm.

or

2.With the cursor pointing to <DHCP enable>, press to confirm.

Step 2 – Select Your Region

1.Rotate the Scroll knob to <Internet radio>, and press to confirm.

Note: If you make a mistake at any point, press the BACK button to go back to the previous screen.

Then the display will show a list of regions for you to choose.

2. Rotate the Scroll knob to your region, and press to confirm. The Radio will save it in memory.

After a few minutes, it will ask you to enter a network.

8

Image 11

Contents Page Safety Information FCC Contents Page What you need before you can use your Internet Radio LAN SettingWireless LAN Setting Internet Radio Quick start GuideUnit Front view Controls Overview aUnit Back View Controls Overview bChoose LAN Setting Connecting to wired networkPower up Radio If this happens, please proceed as follows Enter Internet Radio modeEnter Network Select Your Region Connecting to wireless networkChoose Wlan Setting Entering a Network If this happens, please follow these steps How to select a PodcastHow to get an Access code How to add stations to ‘My favourites’ How to add stations to ‘My Added Stations’ Choosing a station Station UpdatesPlaying Shared Media Music Player Operation ModeScan Setting FM Operation ModeTo store the current station Setting Station PresetsSelecting a Preset station How to change the Station InformationAUX in Operation Mode General Operations Setting the Clock Greenwich Mean Time GMT ---------- for your clock settings Sleep Function Setting Alarm Page Snooze Function Returning To Main Menu Changing VolumeSW Version and Radio ID  The purpose of doing is System Setup OperationsNetwork setup LanguageSoftware Updates Factory resetAppendix Setting Up Media Sharing in WMPPlay Music on the Internet Radio Following steps describe how to play music with your RadioDirectory Setup Set Up Media Sharing in MAC OSSet up Windows File Sharing on a MAC Accounts SetupTroubleshooting Trademark Information SpecificationLicensing information and requirements