Setting Up
Connecting the Acoustimass® module power (mains) cord
1.On a dual voltage system, the voltage selector switch is preset at the factory to be correct for your area. Check to be sure it is set for the proper voltage (Figure 7). Use 115V for North America; 230V for Europe and Australia. In Europe, use the adapter plug provided. If you are in doubt, contact your local electric utility for the appropriate voltage setting.
Figure 7
Dual voltage Acoustimass module: voltage selector switch settings
230 V
115 V
CAUTION: Make sure the voltage selector switch is set correctly.
2. Plug the small end of the power (mains) cord into the Acoustimass module AC power jack.
Note: Do not plug the AC power cord into a power outlet until all component connections are complete.
Connecting the music center AC (mains) power pack
The Lifestyle® music center comes with a 120V AC (mains) power pack for use in the USA and Canada or an appropriate 230V or 240V power pack for international use. (See Figures 1 and 8.) Dual voltage models include both 120V and 230V power packs.
CAUTION: Be sure to use the correct power pack for your area. Using the wrong one may damage your power pack or your music center.
• | Model PS71, | 120V in North America | • | Model PS72, | 230V in Europe |
• | Model PS74, | 230V in UK or Singapore | • | Model PS77, | 240V in Australia |
Figure 8
The AC power pack (model PS71 shown)
1.Firmly insert the small connector on the end of the AC (mains) power pack cable into the AC POWER jack on the back of the Lifestyle® music center.
2.Make sure that the power pack reaches an AC (mains) outlet.
Note: Do not plug the AC power pack into a power outlet until all component connections are complete.
AM196575_05_V.pdf | October 29, 2001 | 11 |