Melissa 646-033 Introduction, Safety Measures, Key, Prior to First USE, Using the Food Processor

Page 10

UK

Emme ole vastuussa mahdollisista painovirheistä.

INTRODUCTION

To get the best out of your new food processor, please read through these instructions carefully before using it for the first time. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your food processor.

SAFETY MEASURES

Normal use of the food processor

Incorrect use of the food processor may cause personal injury and damage to the appliance.

Use the food processor for its intended purpose only. The manufacturer is not responsible for any damage resulting from incorrect use or handling (see also Guarantee Terms).

The food processor may only be connected to 230 V, 50 Hz.

The base of the food processor or cord must not be submerged in water or any other liquid.

Do not operate with wet or damp hands. Make sure that no liquid gets into the motor section.

Never leave the food processor unattended when in use and keep an eye on children.

The blade and grating/slicing disc must be handled with caution, as these parts are extremely sharp. Always remove the blade before emptying the mixing bowl.

Do not leave the food processor running for more than 1 minute at a time. If the food processor has been running for 1 minute, you should leave it to cool down before you use it again.

Do not use the food processor if the bowl or jug is empty.

This food processor is not suitable for commercial or outdoor use.

NEVER use your fingers, kitchen utensils or similar to push ingredients down the feed tube! Use the accompanying pusher.

Do not remove any accessories until the food processor has stopped completely.

Do not use the blade and the grating/slicing disc at the same time in the mixing bowl.

Do not use the blender and the mixing bowl at the same time.

Where to put the food processor

Always place the food processor at the back of the kitchen counter.

Do not place the food processor next to hot areas, for example gas rings and electric hotplates.

Do not allow the cord to hang over the edge of a table/counter, and keep it away from hot objects and naked flames.

Cord, plug and mains socket

Ensure that the cord is fully extended.

Check regularly that the cord and plug are not damaged and do not use the food processor if there is any damage, or if it has been dropped or damaged in any other way.

If the food processor, cord or plug is damaged, the food processor must be inspected and, if necessary, repaired by an authorised repair engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself.

Unplug the food processor before changing accessories, taking the lid off the bowl or cleaning, and when the food processor is not in use.

Avoid pulling the cord when removing the plug from the

socket. Instead, hold the plug.

Check that it is not possible to pull or trip over the food processor cord or any extension cord.

KEY

1.Release button

2.Blender

3.Blender lid

4.Cap

5.Safety cover

6.Blender shaft

7.Mixing bowl shaft

8.Base

9.On/off button

10.Spatula

11.Accessories shaft

12.Plastic cover for blade

13.Blade

14.Pusher

15.Grating/slicing disc

16.Mixing bowl lid

17.Mixing bowl

PRIOR TO FIRST USE

Place the base (8) on a flat surface, e.g. a kitchen counter, and make sure it is standing firmly on the four suckers underneath. Before using the food processor for the first time, or after prolonged storage without use, wash any parts that will come into contact with food.

USING THE FOOD PROCESSOR

Fit the required accessories, and place the ingredients into the food processor as described below.

Start the food processor by turning the on/off button (9) to position 1 or 2 and switch it off by turning it back to position 0.

To use the food processor for brief food preparation, turn the on/off button to position P (pulse function). The food processor will run at top speed as long as you hold the button down in that position, and will stop when you release the button, which then automatically reverts to position 0.

When using the blender (2) or blade (13), you should stop the food processor at regular intervals and check whether the food has been adequately blended/chopped.

10

Image 10
Contents 646-033 Beskrivning IntroduktionSäkerhetsåtgärder Innan Matberedaren Används Första GångenFörvaring Användning AV MixernAnvändning AV Blandarskålen RengöringFØR Første Anvendelse SikkerhedsforanstaltningerOversigt Brug AF FoodprocessorenGarantibestemmelser RengøringMiljøtips ImportørOversikt InnledningSikkerhetsregler FØR DU TAR Apparatet I Bruk Første GangOppbevaring Bruke HurtigmikserenBruke Blandebollen RengjøringOsat JohdantoTurvaohjeet Ennen Ensimmäistä KäyttöäYmpäristönsuojelu Monitoimikoneen KäyttäminenPuhdistus TakuuehdotIntroduction Safety MeasuresUsing the Food Processor KEYCleaning Using the BlenderUsing the Mixing Bowl Guarantee TermsProduktbeschreibung EinleitungSicherheitshinweise VOR DEM Erstmaligen GebrauchGebrauch DES Mixbehälters Gebrauch DER KüchenmaschineGebrauch DES Mixers LagerungGarantiebedingungen ImporteurGdzie umieÊciç robot kuchenny WprowadzenieWskazówki Dotyczñce BEZPIECZE¡STWA Przewód, wtyczka i gniazdko zasilania˝ywanie pojemnika do miksowania Czynnoci WST¢PNEKorzystanie Z Robota Kuchennego PrzechowywanieWskazówki Dotyczñce Ochrony Rodowiska Warunki GwarancjiОписание ВведениеМеры Предосторожности Перед Первым ИспользованиемХранение Использование Кухонного КомбайнаЧистка Импортер

646-033 specifications

Melissa 646-033 is a state-of-the-art solution designed to streamline and enhance data verification processes. As part of the Melissa product suite, this software integrates various advanced features and technologies aimed at providing businesses with accurate, efficient, and reliable data management tools.

One of the main features of Melissa 646-033 is its powerful address verification capability. This allows users to check the accuracy of addresses in real-time, ensuring that the information collected is both valid and up-to-date. The system uses extensive databases and algorithms to cross-reference addresses against national postal standards, giving businesses confidence that their mailing lists are primed for successful delivery.

In addition to address verification, Melissa 646-033 also incorporates email verification features, enabling users to ensure that email addresses are valid and functional. This reduces the risk of bounce-backs during marketing campaigns and helps maintain the integrity of customer communications. The email validation process involves checking the format of the address and confirming that the domain exists and is capable of receiving mail.

Data appending is another significant characteristic of Melissa 646-033. This feature allows organizations to enrich their existing customer databases by adding missing information such as phone numbers, demographics, or social media profiles. This enriched data helps companies make more informed decisions and foster stronger customer relationships by delivering tailored content and communications.

Moreover, Melissa 646-033 is built on robust cloud technology, which provides users with the flexibility to access data from anywhere, at any time. The cloud-based platform ensures that updates and improvements are rolled out seamlessly, keeping users on the cutting edge of data management technology.

Security is a paramount concern for Melissa, and 646-033 does not compromise on this front. The platform employs advanced encryption standards and compliance with relevant data protection regulations, ensuring that user data is safeguarded against potential breaches and misuse.

With its comprehensive suite of features, including address and email verification, data appending, cloud accessibility, and strong security measures, Melissa 646-033 stands out as a valuable tool for businesses eager to improve their data quality and operational efficiency. As organizations increasingly rely on accurate data for strategic decision-making, Melissa 646-033 emerges as an essential resource to meet these critical needs.