IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1.Read all instructions before using.
2.Be sure that the lid knob is assembled and fastened properly before using this appliance. See assembly instructions on page 4.
3.Do not touch hot surfaces. Use HANDLES or KNOBS.
4.To protect against electrical shock, do not immerse CORD, PLUG, or TEMPERATURE CONTROL PROBE in water or other liquid.
5.Close supervision is necessary when any appliance is used near children. This appliance is not to be used by children.
6.Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning.
7.Do not operate any appliance with a damaged CORD or PLUG or after the appliance malfunctions or has been damaged in any manner. Return appliance to Rival® (see warranty) for examination, repair, or adjustment.
8.The use of accessory attachments not recommended by Rival® may cause injuries.
9.Do not use outdoors.
10. Do not let CORD hang over edge of table or counter, or touch |
heated surfaces. |
SAVE THESE INSTRUCTIONS
This appliance is for HOUSEHOLD USE ONLY. No
A short
USED WITH CARE; HOWEVER, THE MARKED ELECTRICAL RATING SHOULD BE AT LEAST AS GREAT AS THE ELECTRICAL RATING OF THE SKILLET. The extension cord should not be allowed to drape over the counter or tabletop where it can be pulled on by children or unintentionally tripped over. KEEP WARM SETTING: The TEMPERATURE CONTROL PROBE has a
“Keep Warm” range setting of approximately 160° to 180° F. The indicator light will cycle on and off when this setting is maintaining the desired temperature. NOTE: During initial use of this appliance, some slight smoke and/or odor may be detected. This is normal with many heating appliances and will not recur after a few uses. Only use with Temperature Control Probe number
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
KNOW YOUR ELECTRIC SKILLET
11. | Do not place on or near a hot gas or electric burner, or in a heated |
| oven. |
12. | Extreme caution must be used when moving an appliance containing |
| hot oil or other hot liquids. |
13. | Always attach TEMPERATURE CONTROL PROBE to appliance first, |
| then plug cord into the wall outlet. To disconnect, turn TEMPERA- |
| TURE CONTROL DIAL to “OFF”, then remove plug from wall outlet. |
14. | Do not use appliance for other than intended use. |
steam vent 
lid knob
side handle/leg
lid
side handle/leg
probe guard
NOTE: Do not operate skillet prior to assembly of LID KNOB.