Silvercrest STOS 826 A1 Tips on usage Before taking into use, Adjusting the browning level, Setup

Page 5

Tips on usage

 

Before taking into use

Toast mixed-flour breads at higher browning levels than white bread. Matured, dry bread browns faster than fresh bread.

Avoid using slices that are too big or too thick, as these can easily become jammed in the appli- ance.

Attention:

In the event of a malfunction and when cleaning the appliance, remove the power plug from the wall socket. Risk of electrical shock!

Loosen jammed slices of bread with a blunt woo- den object (e.g. a wooden spatula or spoon). Do NOT touch the heater elements.

Differences in bread sorts, moisture and the thick- ness of individual slices influence the browning of the toast. Therefore the bread for toasting should be kept in sealed packaging until required.

Heat the appliance up at least five times, at the maximum setting (7), without the insertion of bread slices. For details on cleaning the appliance, read the section "Cleaning and Care"..

Please take note:

The operating button 3 only engages when the power cable is connected to a mains power socket. On the first usage, a slight odour can occur (mini- mal smoke development is also possible). This is normal and stops after a short time. Provide for sufficient ventilation.

Adjusting the browning level

The desired level of browning, from "light" (1) to "dark"" (7), can be adjusted infinitely with the toasting dial 7.

Appliance description

1 Bread roll holder

2 Toasting slots

3 Operating button

4 Button for the thaw function

5 Button for the warm-up function

6Stop button for interrupting the toasting process. 7 Toasting dial

8 Crumb tray

9 Button for the bread-roll attachment

Setup

Unwrap the power cable from the cable winder on the underside of the appliance.

Place the toaster on a dry and level surface.

Toasting

Attention:

When the appliance is in operation, do NOT cover the toasting slots 2. There would be a risk of fire! The appliance could be irreparably damaged!

After setting the desired browning level, place the bread into the toasting slots 2.

Press the operating button 3 downwards. The control lamp on the stop button 6 glows.

The automatic bread aligner centres the inserted bread into the toasting slots.2.

When the desired level of browning has been reached the toaster switches itself off automati- cally and the slices are ejected to the top.

- 3 -

Image 5
Contents Slice Toaster Stos 826 A1 Stos 826 A1 Content Important safety instructions Technical dataIntended Application Items suppliedSetup Adjusting the browning levelTips on usage Before taking into use Appliance descriptionWarming function Interrupting the toasting processThaw function Crumb trayStorage Cleaning and careDisposal Case of doubt, please contact your waste dispo- sal centreRing not carried out by our authorized service Warranty and Service ImporterAny way by this warranty Your goods be assured