•Press and hold down the button "prog" h.
•Enter in the desired start time with the buttons "h" j and "min" u (see chapter "Setting the timer").
•When the desired time has been entered, release the button "prog" h. The Timer is set.
•Enter in the desired coffee strength by turning the aroma knob o.
•Press the button "auto" i until the green indicator s lights up.
•If you wish to deactivate the automatic brewing start, press the button "off" d.
Cleaning and care
•Always remove the plug from the power socket before cleaning the appliance.
Danger of electrical shock
Before you clean the Coffee Maker, you must remove the power plug from the power socket.
Caution
When cleaning the Coffee Maker, under no circumstances may you submerse it in water or hold it under running water.
Risk of burns!
•Remove the filter and rinse the filter holder q, the filter insert y and the thermos jug r under running water.
•Use a dry cloth to wipe it again.
Cleaning of the lid
•To clean the lid of the thermos jug r first disassemble the lid (See Fig. ):
•Carefully pull off the silicone disc from the valve at the underside of the lid. When doing this, hold the valve, because it is pressed up by a spring from the other side.
•You now can take off the valve and the spring.
•Clean all parts with a mild soapy solution and wipe them off well.
•To assemble the lid again, proceed in reversed order.
Note:
Do not let the thermos jug with lid lie in soapy water and do not wash the parts in the dishwasher, as they could become leaky!
If you do not use the Coffee Maker for an extended period, store the power cable in the cable storage compartment t (Fig. ).
Removing scale
Always wait until the Coffee Maker has cooled down before cleaning it.
Take off the lid of the thermos jug r, when cleaning (see Fig )
•Do not use household detergents or sharp/ pointed objects to remove soiling. These could damage the Coffee Maker.
•Wipe the housing of the Coffee Maker and the thermos jug r with a soft cloth lightly moistened with a soapy solution.
•After every brewing process remove the filter bag from the filter insert y.
Remove scale from the Coffee Maker regularly. If your water has a high degree of hardness, the coffee maker must be descaled after every 30 ap- plications, low degrees of hardness need only be descaled after every 60 applications.
Use only descaling agents that are suitable for cof- fee machines and read up the instructions.
•Insert the descaling agent into the water tank w.
•Fill it with enough water for max. 8 large cups.
•Turn the aroma knob o to "calc" to activate the descaling function.
•Press the button "on" f. The red indicator a turns on and the indicator “calc” g is blinking.
•Wait until the solution has completely run through the Coffee Maker.
- 5 -