Questions and Answers

❖If you like extra butter or margarine on your popcorn, you can add more after popping. Simply place a few ⅛-inch pats of butter/margarine on the popped corn, cover popper, and reinsert in the microwave oven for approximately 20 seconds. Butter/margarine will melt and can then be mixed through.

❖You can enjoy the taste of theater popcorn with less harmful fats by using a butter flavored oil, like Orville Redenbacher’s® Gourmet® Buttery Flavor® Popping Oil.

1.Sometimes I get a lot of unpopped kernels and scorched corn. Why? A number of things may be causing this:

a.You may have forgotten to use the PowerBase™ concentrator or PowerCup® concentrator. Quality of popped corn will diminish if the PowerBase™ concentrator or PowerCup® concentrator are not both used.

b.Your PowerCup® concentrator needs to be replaced.

c.You were not using the High setting on your microwave oven.

d.Your microwave oven may have areas where microwave energy is not evenly distributed. Next time you use the pop- per, try positioning the popper in a different location inside the microwave oven.

e.Your microwave oven and the Presto® popper do not work together. Presto’s engineers tested a wide variety of mi- crowave ovens in the design phase of the unit and did not find a microwave oven, in which the popper fit, which did not perform superbly. It is possible, however, that an oven exists which does not work well with the popper. Presto would be very interested if you have such an oven. Please write or call Presto if you believe this is the case.

2.How many unpopped kernels are considered normal for a batch of popped corn?

The number of unpopped kernels will vary depending on the quality and freshness of the corn used, the microwave oven used, and the condition of the PowerCup® concentrator. If the instructions are followed correctly, as indicated on pages

2 and 3, on the first use you will usually get anywhere from 1 unpopped kernel to 1 teaspoon unpopped kernels. Fresh corn and premium corn will give you the best results. You should always get fewer unpopped kernels than microwave bagged corn. If you consistently get a lot of unpopped kernels, review this Question and Answer section.

3.How many batches of popcorn should I be able to pop with each PowerCup® concentrator?

The number of uses will vary from microwave to microwave. When popping with oil, you should be able to make up to 12 batches with each concentrator. When popping without oil, you should be able to make up to 24 batches with each concentrator.

4.After the initial use, the PowerCup® concentrator looks dark and discolored. Should I continue to use it?

Yes. The concentrator does discolor after use and will become more discolored the more you use it. The discoloration is normal and does not affect popping.

5.What can I do to maximize the number of uses I get out of each PowerCup® concentrator when popping with oil?

After each use, wipe concentrator with a damp cloth to remove salt and oil residue. Do not soak concentrator in water or use abrasives to clean it. Always remove concentrator from popping bowl before coating popcorn with toppings, such as caramel sauce.

6.There is oil residue, salt, and other seasonings on the concentrator after I make salted or flavored popcorn. May I wash the concentrator?

As water tends to cause the layers of the PowerCup® concentrator to separate, washing is not recommended. Between batches, oil and salt residue can be easily removed by wiping the concentrator with a damp cloth. Prior to storage for later uses or after making flavored popcorn, you may feel a more complete cleaning is needed. You may rinse the concentrator under warm water and gently wipe away any food residue. Do not scrub or use abrasives. To remove excess moisture from the concentrator, pat dry with a towel prior to storing in your popper.

Note: Do not attempt to dry the concentrator in the microwave. Drying in the microwave will damage both the concen- trator and popper.

7.How will I know when my PowerCup® concentrator needs to be replaced?

If you notice you are getting more unpopped kernels than usual, it is time to replace the concentrator.

Important: Always replace the concentrator immediately if the top layer is torn or cracked.

4830 specifications

The Presto 4830 is a state-of-the-art piece of equipment tailored for high-performance printing and labeling applications. This versatile machine stands out in the market due to its powerful features and innovative technologies that enable it to cater to a wide range of industries including logistics, manufacturing, and retail.

At the core of the Presto 4830 is its advanced printing engine, which utilizes thermal transfer and direct thermal printing technologies. This dual capability allows users to print with high precision and clarity on various materials, ensuring that markings are durable and long-lasting. The machine operates at impressive speeds, capable of producing up to 8 inches per second, accommodating large volume printing needs while maintaining quality.

One of the notable characteristics of the Presto 4830 is its high-resolution output. With a print resolution of up to 600 DPI, it allows for finely detailed graphics, barcodes, and text, making it ideal for applications that demand high-quality outputs such as product labeling and inventory management. The machine supports a wide range of label sizes and materials, from small, intricate labels to larger ones used in shipping and tracking.

Integration and connectivity are also key features of the Presto 4830. It supports multiple interfaces including USB, Ethernet, and Bluetooth, enabling seamless integration into existing workflows and systems. This connectivity expands its usability in various settings, whether in a standalone capacity or as part of a larger automated labeling system.

User-friendliness is another aspect where the Presto 4830 excels. The machine is equipped with an intuitive touchscreen interface that allows operators to easily set up, configure, and monitor printing jobs. This simplifies the user experience, minimizing training time and enhancing operational efficiency.

Moreover, the Presto 4830 is designed with durability in mind. Built with robust materials, it can withstand the rigors of busy production environments. Its modular design facilitates easy maintenance and upgrades, ensuring the machine remains operational with minimal downtime.

In conclusion, the Presto 4830 is a comprehensive solution for organizations seeking a reliable and efficient printing system. With its advanced technologies, high-speed performance, and user-friendly features, it is well-suited to meet the demands of various industries, making it a valuable asset in any production line.