POSITIONING RACKS
To accommodate a wide variety of foods the oven has two reversible racks and two rack positions. The racks can be inserted in the oven in the up position or down position. The racks will fit into either of the rack guides inside of the toaster oven (see Figure).
Before removing the racks allow the unit to cool.
To remove a rack, open the oven door and pull the rack towards the front of the oven. The rack will slide on the rack guides on the inside of the oven.
Positioning of the rack will depend on the size of the food and desired browning.
NOTE: Lower rack will not auto advance unless the rack is inside hooks on the glass door.
TIPS:
Adjust rack downward to prevent top browning and upward to prevent bottom burning.
For best toasting results, position the rack in the up position on the lower rack guide.
When broiling, position the rack in the up position on the upper rack guide.
To replace the rack in the oven, align rack in rack guide and slide toward the back of the oven.
NOTE: Heating elements may cycle ON and OFF to maintain the desired temperature.
CLEANING YOUR TOASTER OVEN
Before cleaning your OSTER® Toaster Oven, unplug it and allow it to cool. To clean, wipe with damp cloth. DO NOT IMMERSE IN WATER! Make sure to use only mild, soapy water. Abrasive cleaners, scrubbing brushes and chemical cleaners will damage the continuous clean coating on this unit. Empty crumb tray frequently to avoid accumulation of crumbs.
STORING YOUR TOASTER OVEN
Allow the appliance to cool completely before storing. If storing the toaster oven for long periods of time make certain that the toaster oven is clean and free of food particles. Store the toaster oven in a dry location such as on a table or countertop or in a cupboard shelf. Wind the electrical cord around the cord storage brackets. Other than the recommended cleaning,
no further user maintenance should be necessary.