Preparing To Use Your Toaster Oven for the First Time
If you are using your toaster oven for the first time, please be sure to: Remove any stickers from the surface of the oven.
Open oven door and remove all printed documents and paper from inside the toaster oven.
Clean the rack, tray, and pan with hot water, a small amount of dishwashing liquid and a
DO NOT IMMERSE THE BODY OF THE UNIT IN WATER. Dry the unit thoroughly before using.
Select a location for the toaster oven. The location should be in an open area on a flat counter where the plug will reach an outlet.
Plug the toaster oven into a 120 Volt AC electrical outlet.
Using Your Toaster Oven
Setting the Clock
Push the Clock button and hold for three seconds. The clock will flash. Use the arrow keys to set the hour. Push the Clock button again.
Use the arrow keys to set the minutes.
Push the Clock button once more and the time will be set.
Preheating the Oven
Place oven rack into the desired position before heating the oven. (See “Positioning Rack” Section)
Push oven button once.
Use arrows to set desired temperature.
Push Timer/Temp button, then the down arrow until seven minutes is displayed. Push the Start button.
To Use the Bake Function
Place oven rack into the desired position before heating the oven. (See “Positioning Rack” Section)
Arrange food on the wire rack or in the baking pan.
Push the Oven button once. Use the arrow keys to select desired temperature. Push Timer/Temp button. Use the arrow keys to select desired time.
Push the Start button.
NOTE – Both heating elements will cycle ON and OFF to maintainthe desired temperature. When baking is completed, open door fully and remove food carefully.
To Use the Convection Fan Bake Function
When you select the Fan Bake the convection fan will turn on and circulate air allowing the food to cook evenly and faster.
Place oven rack into the desired position before heating the oven. (See “Positioning Rack” Section)
Arrange food on the wire rack or in the baking pan.
Push the Oven button two times until “Fan Bake” lights up on display. Use the arrow keys to select desired temperature.
Push Timer/Temp button. Use the arrow keys to select desired time. Push the Start button.
NOTE – Both heating elements will cycle ON and OFF to maintainthe desired temperature. When baking is completed, open door fully and remove food carefully.