Wiring of Aswcstalk and interface

STALK

1.Connect the BLACK wires of the ASWCSTALK and the BLACK wire of the interface to ground. You may use the same ground point that is used for the radio.

2.Connect the GREEN/ORANGE and BLACK/GREEN wires of the ASWCSTALK to the corresponding wires on the interface.

3.Connect the RED wire to 12 volt accessory

4.Tap off all other unused wires on the interface.

Programming the ASWCSTALK

* If this is the first time the ASWCSTALK is being installed:

1.Turn the ignition on; the led will start flashing rapidly which means the interface is looking for the ASWCSTALK and the radio. Go to step 3.

* If the ASWCSTALK was installed before:

1.Turn the ignition on, the led will flash slowly

2.Hold down the reset button for more then 2 seconds but less then 10 seconds, the led will start flashing rapidly

3.The ASWCSTALK INTERFACE will automatically find the ASWCSTALK and radio.

4.After a couple of seconds the led should stop flashing and not light up for 2 seconds. At this point do not push any buttons.

5.After the 2 seconds there will be a series of 7 flashes, some short and some long.

6.The led will pause for another 2 seconds then flash up to 10 times.

7.This is the end of the auto detection stage. If the ASWCSTALK interface detected the vehicle and the radio successfully the led will light up solid red.

8.Make sure the steering wheel control buttons function correctly in the vehicle and enjoy your radio.

OESWC-CLASS2H specifications

The Axxess Interface OESWC-CLASS2H is a cutting-edge solution designed to seamlessly integrate aftermarket radios with select Chrysler, Dodge, Jeep, and RAM vehicles. This interface offers a range of features that significantly enhance the connectivity and functionality of your audio system, ensuring an upgraded in-car experience.

One of the standout features of the OESWC-CLASS2H is its ability to retain steering wheel control access. This allows users to maintain full control over their audio settings directly from the vehicle's steering wheel, providing both convenience and safety while driving. The interface supports various control configurations, ensuring compatibility with different vehicle models.

Additionally, the OESWC-CLASS2H incorporates a built-in CANBUS system that facilitates communication between the aftermarket radio and the vehicle. This feature is critical as it allows for the retention of essential data functions, including vehicle settings and features that can be displayed on the radio screen. Users can conveniently access important information without compromising their auditory experience.

The OESWC-CLASS2H also supports amplified systems, ensuring compatibility with factory-installed amplifiers. This means that users can enjoy high-quality sound output without losing the audio fidelity provided by their vehicle’s advanced sound system. Another significant characteristic is its simple installation process, which reduces the complexity and time typically associated with aftermarket upgrades. The interface is designed to eliminate the need for extensive rewiring, making it accessible for both professional installers and DIY enthusiasts.

In terms of technology, the Axxess Interface is equipped with advanced microprocessor capabilities for enhanced processing speed and performance. This technology ensures that the interface operates smoothly, minimizing the chances of glitches or interruptions during usage.

Moreover, the OESWC-CLASS2H comes with comprehensive vehicle compatibility information included in its user manual, allowing users to confirm fitment before purchase. This attention to detail is part of what makes Axxess a trusted name in automotive audio integration. Overall, the Axxess Interface OESWC-CLASS2H is an essential tool for anyone looking to replace or upgrade their vehicle’s sound system while retaining critical functions and features seamlessly.