Important Safeguards

When using electrical appliances, basic safety precautions should always be followed, including the following:

1.Read, understand, and follow all instructions prior to use.

2.To protect against risk of electric shock, do not immerse the motor, power cord, or plug in water or other liquid. This may cause personal injury and/or damage to the product.

3.Do not operate knife in water or under running water.

4.Close supervision is necessary when it is used by or near children.

5.Unplug from outlet while not in use, before putting on or taking off parts and before cleaning. Allow cooling before handling.

6.Do not leave knife unattended while being used.

7.Avoid contact with the moving parts.

8.Do not operate knife with a damaged cord or plug, after the appliance malfunctions, or if it is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.

9.The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.

10.Do not let cord hang over edge of table or counter or touch hot surfaces, including the stove.

11.Do not place knife on or near a hot gas or electric burner or in a heated oven.

12.Do not use outdoors or for commercial purposes.

13.Disconnect when changing blades.

14.Blades are sharp. Handle carefully. Always handle blades with hand away from cutting edge. Always store blades with cutting edge away from you.

15.Do not use the device with wet or moist hand.

16.Do not touch surfaces that may be hot. Use handles or knobs provided.

17.Do not us the appliance for other than its intended use.

FOR HOUSEHOLD USE ONLY

READ AND SAVE THESE INSTRUCTIONS

NOTE: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any Way.