Home Installation
Just like when you first set up the Home Kit that came with your XMp3i™ or Pioneer XMp3™ Radio, there are two parts to setting up this Additional Home Kit.. First, connecting the Home Dock to your stereo system or set of powered speakers, then placing and aiming the Indoor/Outdoor Home Antenna.. Let’s start with getting your Home Dock set up..
Step 1: Connect the Home Dock
When setting up the Home Dock in your home or office, choose a location in close proximity to your stereo system or powered speakers, and also where the cable from the Indoor/Outdoor Home Antenna can reach the Home Dock.. The location should be easily accessible and provide good visibility of the display, but should not be located where it will be in direct sunlight, which will affect the visibility of the display screen..
You will also need to decide whether you will be connecting your Home Dock to your stereo system using the provided Stereo Audio Cable, or directly to a set of powered speakers..
Connect the Indoor/Outdoor
Home Antenna
Once you have selected a location, connect the antenna to the silver ANT connector at the right side of the Home Dock.. (After completing a few additional steps, we will work on the location of the antenna..)
12