Audiovox SRSIR-001FM Special Functions Using the Shift Button, Direct FM Frequency Selection

SPECIAL FUNCTIONS USING THE SHIFT BUTTON

There are a number of user preference functions that can be adjusted simply by using the Shift (SFT) button with a specific number code. These functions are explained in the following paragraphs.

DIRECT FM FREQUENCY SELECTION

The selection of a specific FM frequency can be directly accessed us- ing the appropriate code; these codes are presented as follows:

In general, a shift/code is entered in the following manner:

SFT 0 9 SFT , where:

(SFT) represents Shift button activation and XX represents the specific function code. (The 4-digit code always starts with 09.)

4. Repeat the procedure in steps 2 and 3 to save nine other desirable

CODE	SELECTION
21	88.1MHz
22	88.3MHz
23	88.5MHz
24	88.7MHz

CODE	SELECTION
25	88.9MHz
26	89.1MHz
27	89.3MHz

channels for quick access.

Figure 11. Modulator Frequency Codes

NOTE: The default frequency is 88.5MHz

		1	2	3
	The Joint	4	5	6
	Khrisp	7	8	9
Oh Baby Oh Baby
-----------------------------------
CH 101	World	6	0
AUDIO OX			SFT

PRESS AND HOLD ANY NUMBER BUTTON (0-9) TO COMMIT THE CHANNEL TO PRESET MEMORY

SYSTEM DEFAULT SHIFT CODE

Defaults refer to the settings that are entered at the factory. When code 31 is entered, the system is reset to the following defaults:

1.	All channel presets cancel and revert to channel 184.
2.	The LCD backlighting reverts to Green
3.	Button confirmation tone is turned on.

SELECT THE	THE PRESET MEMORY
	LOCATION APPEARS
DESIRED CHANNEL
	HERE

4. All channels that were previously Locked Out or Skipped are reinstated

Figure 10. Setting Preset Channels

8

LCD CONTRAST SHIFT CODE

To change the LCD contrast:

1.Enter code 35.

2.Use the Up and Down directional buttons to increase or decrease display contrast, respectively.

3.Press the SFT button to exit LCD contrast mode.

128-6374

8 of 12