English
Intended Use
Your Black and Decker Coffee Bean Mill has been designed for grinding coffee beans. Do not use this appliance for any other purpose. This appliance is intended for indoor consumer use only.
Safety Instructions
Warning! When using
•Read all of this manual carefully before using the appliance.
•The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
•Retain this manual for future reference.
•Always route the cord carefully to avoid a tripping hazard.
•Never operate an appliance directly below the
Electrical safety
This tool is double insulated; therefore no earth wire is required.
Always check that the power supply corresponds to the voltage on the rating plate.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
Grinding Beans
1.Remove the lid (1) from the bowl (2) and add the required amount of coffee beans. Do not exceed the maximum capacity (marked with a line on the side of the bowl).
2.Refit the lid (1)
3.Ensure the container lid (7) is fitted securely onto the coffee container (8).
4.Place the bowl into position on the motor housing (6) and rotate clockwise until you hear a ratcheting sound.
5.Select the correct grind setting. As a guide use a fine setting for espresso, a medium setting for cafetierres and filter machines and a coarse setting for percolators. Turn the bowl (2) clockwise to select a finer setting and anti clockwise for a coarser setting. The setting indicator on the housing (6) should align with the desired grind setting marked on the bowl (2).
6.Plug the mains cable into a suitable power supply and switch on the main switch (10).
7.Turn the cups quantity selector (4) to select the grinding time and then press the start / stop button (5) to begin grinding.