Product may vary slightly from what is illustrated.
How to Use
This product is for household use only.
GETTING STARTED
•Remove all packing material and any stickers from the product.
•Remove and save literature.
•Please go to www.prodprotect.com/applica to register your warranty.
•Wash all removable parts as instructed in CARE AND CLEANING section of this manual.
•Wipe outside of appliance with a damp cloth; dry thoroughly.
BLENDER JAR ASSEMBLY
1.Turn blending jar upside down and place flat on countertop or work surface.
ENGLISH
† | 1. | Lid cap (Part # |
† | 2. | Lid (Part # |
| 3. | Handle |
† | 4. | Blending jar: |
B
C
USING YOUR BLENDER
2.Put gasket on top of blade assembly. Place blade assembly with gasket into bottom opening of the jar with blades facing down.
3.Place jar base onto jar and rotate clockwise until it is tight (B).
4.Turn assembled jar right side up.
5.Place lid with lid cap onto blending jar.
6.Uncoil power cord from storage area under the base.
Note: Do not plug in the cord.
7.Place jar assembly on base, making sure it is pressed firmly into place. (Jar base should not extend more than
8.Blender is now ready for use.
BL2010WG: Glass, 42 oz. / 5 cups (Part #
BL2010WP: Plastic, 48 oz. / 6 cups (Part #
†5. Gasket (Part #
†6. Blade assembly (Part #
†7. Jar base (Part #
8.Blender base
9.Control panel
Note: † indicates consumer replaceable/removable parts
1.Make sure appliance is OFF.
2.Place foods to be blended into jar.
3.Place lid on jar; make sure lid cap is in place.
4.Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods, such as ice, cheese, nuts and coffee beans, keep one hand on the lid to keep blender in place.
5.Press the High or Low button; then select the speed that best suits your desired task. To switch speeds, press the High or Low button and the new speed desired. (See SPEED CHART on page 8.)