SELECTING A SPEED
| PULSE/OFF | P/O | Use for thick mixtures |
|
|
|
|
|
|
| STIR | 1 | Reconstitute frozen juices, drink mixes | |
|
|
| and condensed soups | |
|
|
| Prepare salad dressings | |
|
|
| Blend puddings | |
|
|
| Puree hot liquids | |
|
|
|
|
|
| AERATE | 2 | Aerate soups and beverages | |
|
|
|
|
|
| PUREE | 3 | Puree baby foods – fruits and vegetables | |
|
|
|
|
|
| CHOP | 4 | Chop fruits and vegetables | |
|
|
| Chop cooked meats | |
|
|
|
|
|
| BLEND | 5 | Blend salsas | |
|
|
| Prepare sauces | |
|
|
| Remove lumps from gravies | |
|
|
|
|
|
| CLEAN | 6 | Blend drop of dishwashing liquid and hot water | |
|
|
| to clean blender |
|
| GRATE | 7 | Grate hard cheeses and vegetables | |
|
|
| Make superfine sugar |
|
| GRIND | 8 | Chop nuts, | |
|
|
| Grind coffee beans, spices and chocolate | |
|
|
| Grind hard cheese, cooked meats and coconut |
|
| LIQUEFY | 9 | Blend protein drinks | |
|
|
| Liquefy frozen drinks; smoothies |
|
| SMOOTHIE | 10 | Blend milk shakes and malts | |
|
|
| Prepare smoothies |
|
| HI/LOW | ― | Select to change speed between Hi and Low | |
|
|
| Hi – the button is out | |
|
|
| Low – the button is in | |
|
|
|
|
|
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service personnel.
CLEANING
1.Before cleaning, turn off and unplug the appliance.
2.Lift the jar off the power base by the handle.
3.Remove jar base by turning it counterclockwise until loose.
4.Remove the gasket and the blade assembly.
Caution: Blades are sharp, handle carefully.
5.Remove lid and lid cap.
6.Wash removable parts by hand or in the dishwasher. Place the jar on the bottom rack and the rest of the parts on the top rack only.
Helpful Tip:
•For quick cleanup, combine 1 cup hot water and a drop of liquid dish soap in the blender jar.
•Cover and blend on CLEAN (6) for about 30 seconds.
•Discard liquid and rinse thoroughly.
Important:
•Do not place the jar parts in boiling liquids.
•Do not immerse the base in liquid. Wipe the unit base with a damp cloth and dry thoroughly.
•Remove stubborn spots by rubbing with a damp cloth and nonabrasive cleaner.
Note: If liquids spill onto the power base, wipe with a damp cloth and dry thoroughly. Do not use rough scouring pads or cleansers on blender parts or finish.
7
8