Black & Decker MGD300 Coffeemaker Parts, How To Use, Important Wash Carafe Before First Use

COFFEEMAKER PARTS

One-Piece Cover

Water Spreader

Water Reservoir

Water Window with Cup Level Markings

Removable Brew Basket

Hinged Carafe Lid

10-Cup/50 oz. Carafe

Sneak-A-Cup®

Drip Stop

"Keeps Hot" Plate

Control Panel

HOW TO USE

IMPORTANT: WASH CARAFE BEFORE FIRST USE!

1.Before first use, remove all stickers, packing material, and literature.

2.Wash the Carafe, Filter Basket, and Lid in hot, sudsy water—rinse thoroughly—or in a dishwasher, top rack.

3.Pour cold water up to the 8-cup level mark into the Water Reservoir and brew it through as instructed in BREWING COFFEE, but do not add coffee grounds. When done, turn the Coffeemaker off and discard the water from the Carafe.

BREWING COFFEE

1.Lift the one-piece Cover and use the Carafe to fill the Water Reservoir with cold water to your desired level (watch for the level in the Water Windows).

2.Place a paper filter into the Brew Basket, add coffee to the desired level (about one heaping tablespoon for every 2 cups—adjust to your taste) and close the Cover.

3.Sit the Carafe with its Lid on the “Keeps Hot” plate and plug the unit in.

4.Press “On/Off” and the light under it will come on. Or for delayed brewing, see “Setting the Clock Timer.” You don’t have to set the clock if you want to brew coffee right away.

4