|
| 2. | Wipe off the |
|
| Base/ Motor Housing | |
|
| with a damp cloth; do | |
|
| not immerse Base in | |
|
| water. | |
| Locking |
|
|
| Tabs | TO ASSEMBLE | |
|
| ||
|
| 1. | Place the Base |
|
| Unit on a counter, or | |
|
| other flat work sur- | |
|
| face. The rubber feet | |
|
| will prevent the unit | |
Figure A |
| ||
| from slipping during | ||
|
| ||
|
| operation. | |
2.Grasp the Bowl firmly and place it on the Base. Line up the Locking Tabs on the Bowl and the Base and turn clockwise until the Bowl locks into place. (Figure A)
3.Slide the Knife Blade down over the shaft. Be careful not to touch the Blade as it is extremely sharp.
4.Place the Lid on the Bowl, with the Extended Tab on the same side as the Base Slot. Turn the Lid clockwise into the Base Slot as far as it will go.
6